User's Manual

 Advanced Card Systems Ltd. `Page 20 of 46
2. ACR1222U PCSC Direct Command Test
This program is used to demonstrate the PCSC Escape functions of the ACR1222U readers.
Operating Procedures:
1. Select the “ACS ACR1222 SAM Interface 0”.
2. Select the “Shared Mode” if a SAM is inserted or “Direct Mode if no Sam is inserted.
3. Press the button “Connect” to establish a connection between the PC and the
ACR1222U reader.
4. Enter “
2079” in the Command Text Box.
5. Enter the PCSC Escape Command, e.g. “21 01 8F” and press the button “Send” to send
the command to the reader.
6. Press the button “Disconnect” to break the connection.
Hints: “21 01 8F” is used for setting the LED and Buzzer Behaviors.
Remarks:
The program can be used to test all the PCSC interfaces. E.g. ACR1222U ICC or PICC
Interface.