User's Manual

 Advanced Card Systems Ltd. Page 17 of 46
HARDWARE DESCRIPTION
1. LED Indicatior
The LEDs are used for showing the state of the contact and contactless interfaces.The Red LED is
used for showing PICC status and Green LED for ICC.
Reader States Red LED
PICC Indicator
Green LED
ICC Indicator
1. No PICC Found or PICC present but not
activated.
A single pulse per
~ 5 seconds
2. PICC is present and activated ON
3. PICC is operating Blinking
4. ICC is present and activated ON
5. ICC is absent or not activated OFF
6. ICC is operating Blinking
2. Buzzer
A monotone buzzer is used to show the “Card Insertion” and “Card Removal” events.
Events Buzzer
1. The reader powered up and initialization
success.
Beep
2. Card Insertion Event (ICC or PICC) Beep
3. Card Removal Event (ICC or PICC) Beep