Advanced Card Systems Limited ACM1252U-Z2 User Manual ACM1252U-Z2 User Manual V1.00 Subject to change without prior notice info@acs.com.hk www.acs.com.
Advanced Card Systems Limited Version History Date By 2016-09-19 Keith Mo Changes ● Initial Version Version 1.00 ● Page 2 of 13 ACM1252U-Z2 User Manual Version 1.00 info@acs.com.hk www.acs.com.
Advanced Card Systems Limited Table of Contents 1.0. INTRODUCTION .................................................................................................................................... 4 2.0. FEATURES ............................................................................................................................................. 5 3.0. ARCHITECTURE ..................................................................................................................................
Advanced Card Systems Limited 1.0. Introduction The ACM1252U-Z2 is a reader (IFD and PCD) module that support contactless (PICC) smart cards. The ACM1252U-Z2 is an NFC reader module developed based on the 13.56 MHz contactless technology. This NFC Reader Module supports all three NFC modes namely card reader/writer, card emulation, and peer-to-peer communication. The ACM1252U-Z2 supports ISO 14443 Type A and B cards, MIFARE®, FeliCa, and ISO 18092–compliant NFC tags.
Advanced Card Systems Limited 2.0. Features ISO 14443 Parts 1-4 Compliant for Contactless Smart Card Interface. ISO 18092 Compliant for Contactless Smart Card Interface. An external antenna for PICC contactless access applications. The ACM1252U-Z2 supports the following Tag Types: o MIFARE Classic. E.g. MIFARE 1K, 4K, MINI and Ultralight. o ISO14443-4 Type A and B.
Advanced Card Systems Limited 3.0. Architecture NXP’s LPC11U37 is for main processor for communication with PC, and control the contactless chip and peripherals. PN512 act as a contactless chip to perform the communication between contactless tags and LPC11U37 For communication architecture, the protocol between ACM1252U-Z2 and PC is using CCID protocol. All the communication between PICC is PCSC Compliant Page 6 of 13 ACM1252U-Z2 User Manual Version 1.00 info@acs.com.hk www.acs.com.
Advanced Card Systems Limited 4.0. ACM1252U-Z2 Operating Procedure 4.1. Driver installation Procedure Hardware requires: ACM1252U-Z2 PC with OS window XP or above Software requires: Driver installer “ACS_Unified_PCSC_Driver_Installer_bin-4.0.6.0-20141114_all.zip” Steps: 1. Extract the file “ACS_Unified_PCSC_Driver_Installer_bin-4.0.6.0-20141114_all.zip” 2. Execute “Setup.exe” 3. Below screen will be shown Select the language, then Click “OK” Page 7 of 13 ACM1252U-Z2 User Manual Version 1.
Advanced Card Systems Limited 4. Below screen will be shown, “Next” to continue 5. Below screen will be shown, configure the installation path, then “Next” to continue Page 8 of 13 ACM1252U-Z2 User Manual Version 1.00 info@acs.com.hk www.acs.com.
Advanced Card Systems Limited 6. Below screen will be shown, “Install” to continue 7. Waiting until below screen shown Click “Finish” 8. Driver Installation Complete Page 9 of 13 ACM1252U-Z2 User Manual Version 1.00 info@acs.com.hk www.acs.com.
Advanced Card Systems Limited 4.2. Operation Example Hardware requires: ACM1252U-Z2 PC with OS window XP or above Test card x 1 (provided by ACS) Software requires: APDU.exe (for example) Steps: 1. Plug in the reader into the PC 2. Place the Test Card on the top of the reader about 5cm 3. Open “APDU.exe” 4. Click “1. Select reader”, Chose “ACS ACR1252 CL Reader PICC 0”, then click “OK” Page 10 of 13 ACM1252U-Z2 User Manual Version 1.00 info@acs.com.hk www.acs.com.
Advanced Card Systems Limited 5. Select “T1”, “Stress”, Message = “FF CA 00 00 00”, Interval = “500” 6. Press “Connect” 7. Press “Transmit” to start the testing 8. Below screen will be shown Page 11 of 13 ACM1252U-Z2 User Manual Version 1.00 info@acs.com.hk www.acs.com.
Advanced Card Systems Limited 9. Can start the Lab Test Page 12 of 13 ACM1252U-Z2 User Manual Version 1.00 info@acs.com.hk www.acs.com.
Advanced Card Systems Limited Appendix A. Technical Specifications Universal Serial Bus Interface Power Source................................. From USB Speed............................................. 12 Mbps (Full Speed) Supply Voltage ............................... Regulated 5 V DC Supply Current .............................. Max. 200 mA Contactless Smart Card Interface Standard ........................................ ISO/IEC 18092 NFC, ISO 14443 Type A & B, MIFARE, FeliCa Protocol ...............
Advanced Card Systems Limited FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
