Operation Manual

Understanding Naída CI LEDs
The Naída CI LEDs are a programmable feature providing visual information about the Naída
CI status, battery life, program position, and error conditions.
Naída CI Sound Processor LED Indications
NOTE: Use of some Naída CI accessories may obscure the processor LED.
Naída CI Sound Processor User Guide 25
Color Behavior Programmable Indication
Orange
Blinks at start-up No. Battery indicator is
only available with use
of the rechargeable
PowerCels and AAA
PowerPak. Battery life
indicators are not
available with use of
Zn-Air batteries.
• 4 quick blinks indicate that the
battery is fully charged
• 2 - 3 quick blinks indicate that the
battery is sufficiently charged to
power the Naída CI
•1quick blink indicates that the
battery is nearly depleted
• No blinking indicates depleted
battery. Replace with charged or
new battery
Solid Yes The battery is almost depleted
Blinks twice every
three seconds
Yes The battery is almost depleted
and cannot support stimulation
(Sleep Mode)
Fades out No The Naída CI is entering Sleep Mode
Red
Blinks once
per second
Yes Loss of lock with the implant
Blinks rapidly (more
than once per
second)
No Intellilink™ enabled and the Naída
CI is connected to the wrong implant
Solid No Sound processor error condition. Fully
remove and re-insert the battery to
reset processor
Green
Flickers in response
to loud inputs
Yes The sound processor and microphone
are responding to sound
Blinks at start-up,
after battery
status, and upon
program change
No • 1 blink indicates program one
• 2 blinks indicate program two
• 3 blinks indicate program three
• 4 blinks indicate program four
• 5 blinks indicate program five
Solid Green No A processor that is not yet programmed
Blinks 4 times No-if using AB myPilot
this pattern is the default
Response to AB myPilot’s request to ‘Find
Paired Devices’. The Left paired device will
identify, itself with this LED pattern.
Blinks 5 times No-if using AB myPilot
this pattern is the default
Response to AB myPilot’s request to
‘Find Paired Devices’. The Right paired
device will identify, itself with this LED
pattern.