User guide

22 User Guide for the Auria Harmony Sound Processor
Low Battery and Change Battery Indicators (programmable features)
When the PowerCel is near depletion but still able to support stimulation, a steady
ORANGE light (low battery indicator) will illuminate indicating that it is time to
change the PowerCel. When the PowerCel is depleted to the point that it is unable to
support stimulation but not completely depleted, the ORANGE light will blink twice
every 3 seconds (change battery indicator). Once the battery is fully depleted, no
light will emit from the processor, and no sound will be transmitted to your Implant.
NOTE: The low battery and change battery indicators are features that are
programmed by your audiologist. Please consult with your audiologist to
determine if these features have been enabled for your processor in any
or all of your programs. These features are disabled for programs with the
built-in telecoil enabled.
ID Mismatch Indicator
Should you accidentally attempt to use the wrong processor, a RED light will rapidly
fl ash indicating that the processor is trying to lock with the wrong implant.
Microphone Test Indicator
When a program slot for microphone testing is selected, a steady GREEN light will
illuminate indicating that the processor is ready for testing the built-in microphone.
Processor Error Indicator
In rare instances, your processor LED may emit a continuous RED light. This
indicates a potential problem with your processor. If this should occur, fi rst remove
and replace your power source. If this does not resolve the problem, please contact
your audiologist for additional troubleshooting.