User guide

20 User Guide for the Auria Harmony Sound Processor
Adjusting the Volume
CAUTION: Remember to turn the volume down prior to placing your headpiece
over the implant.
The volume dial can be used to control the loudness level of a program. The
volume position is indicated by the white dot on the volume dial. Typically, your
audiologist will program your processor so that the 12 o’clock position will correspond
to your most comfortable listening level. To increase volume, move the volume
dial in the clockwise direction. To reduce volume, move the volume dial in the
counterclockwise direction.
Figure 18: Volume Dial, LED Status Indicator, Program Switch.
Changing Programs
Your processor can store up to three programs. The program switch has three positions
to represent each stored program. To change programs, move the program switch
either up or down.
• Program 1: Switch all the way down
• Program 2: Switch in the middle
• Program 3: Switch all the way up