Product guide

2
TOOLS for SCHOOLS by Advanced Bionics HARMONY® SOUND PROCESSOR Product Guide
Built-in
Microphone
Built-in LED Status Light
Volume Control
Program Switch
Built-in TeleCoil
Processor Module
PowerCel™
Rechargeable Battery
T-Mic® Microphone
Earhook
Headpiece Cable
Connector
Accent Color
Cover
Headpiece and Cable
with Color Cover
Quick-Start Guide and System Checks:
Step 1: Slide the fully charged PowerCel onto the Processor Module. This will turn on the
Harmony Sound Processor. Check to ensure that the PowerCel is in a fully aligned
position with the Processor Module and that the PowerCel is charged by verifying
that the LED sequence displays three to four quick ORANGE blinks.
Step 2: Position the Accent Color Cover over the Harmony Processor and snap into place.
Step 3: Make sure that the Headpiece Cable is plugged into the Processor Module. Check
that the Cable is not twisted or frayed.
Step 4: Align and gently snap into place the selected Earhook. Check to verify that the
Earhook is properly positioned. To remove the Earhook, turn to the right or left
until the Earhook releases from the post.
Step 5: Verify that the Program Selector and Volume Control are in the desired position.
Step 6: Ensure that the Processor is in a comfortable position behind the ear.
Step 7: Ensure that the Headpiece is positioned over the internal implant (you will feel
the magnetic attraction).
Step 8: Perform a behavioral listening check, using the Ling Six sounds or another
listening activity.