User guide

Microphone:
The HiRes Auria Processor utilizes a forward facing omni-directional (accepts sound
from all directions) microphone located at the top of the processor to capture
sound input.
Program Switch:
The HiRes Auria Processor can store up to three programs. The program switch is
located below the volume dial on your processor and has three positions to
represent each stored program:
Program 1: switch all the way down
Program 2: switch in the middle
Program 3: switch all the way up
FIGURES 2 & 3: Program Switch and Volume Dial
Volume Dial Operation:
The volume dial can be used to control the loudness
level of a program. To adjust the volume:
• Turn dial clockwise using the side of your index finger to increase volume.
• Turn dial counterclockwise using the side of your index finger to decrease volume.
NOTE: Usually your audiologist will set the 12 o’clock position on your volume dial as
your most comfortable listening level. The volume position is indicated by the
white dot located on the dial.
CAUTION: To avoid overly loud sounds please remember to turn the volume dial
down prior to placing the HiRes Auria Headpiece over the implant.
8 AURIA
®
User Guide