User guide

FIGURE 15: Auria FireFly
To remove earhooks:
• Turn the earhook accessories slightly more than a 1/4 turn in either direction until
it pops off.
FIGURE 16: Removing Auria Earhooks
To replace earhooks:
• To replace the earhook accessories
• Align the earhook so it is flush with your HiRes Auria Processor.
• Check to make sure the orange o-ring is in place at the base of the HiRes Auria
Processor.
Hold the earhook at the base.
• Push on until it lightly snaps in place.
• Gently pull to confirm that it is locked in place.
NOTE: If the orange o-ring is missing from your HiRes Auria Processor, call Advanced
Bionics Customer Service for a replacement. The earhooks will not snap into
place without the o-ring.
FIGURE 17: Replacing Auria Earhooks
AURIA
®
User Guide 15