MP9055126 Rev.
Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Part I: Using your HiRes® Auria® Processor . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Electro-Static Discharge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Auria Carrying Case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Dri-Aid Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Regenerating the Dri-Aid Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table of Figures FIGURE 1: HiRes Auria Processor with Components ..............................................................7 FIGURE 2 & 3: Program Switch and Volume Dial .......................................................................8 FIGURE 4: HiRes Auria Processor with Connection to Attached Headpiece and Cable .................................................................................9 FIGURE 5: Removal of Auria Headpiece Cap.........................................................
Introduction The User Guide provides information on the use and maintenance of the HiRes Auria Processor. HiRes Auria Processor Kit Contents The following items may or may not be included in your HiRes Auria Processor Kit.
Labeling The symbols below are used on the labeling for the product and for transportation, and their meanings are as follows: CAUTION: Federal law restricts this device to sale, distribution and use by or on the order of a physician European Community Mark of Conformity Authorized to affix the CE Mark in 2003 REF Model Number SN Serial Number See Instructions for Use Store at temperatures between 0˚C and +50˚C Fragile Date of Manufacture Type of Protection: BF Do not get wet Dispose of properly
6 AURIA User Guide ®
Part I: Using your HiRes Auria Processor Overview The HiRes Auria Processor is a small lightweight, behind the ear sound processor designed to work with the most advanced technology in sound processing. The HiRes Auria Processor is designed with easy to use controls to suit a variety of individual needs.
Microphone: The HiRes Auria Processor utilizes a forward facing omni-directional (accepts sound from all directions) microphone located at the top of the processor to capture sound input. Program Switch: The HiRes Auria Processor can store up to three programs.
Auria Headpiece with Attached Cable The headpiece contains the transmitter for sending sound information to the implant. The headpiece is held securely in place over the implant by magnetic attraction. It is designed with smooth rounded surfaces of lightweight materials to provide comfort for users of the HiRes Auria Processor. The headpiece cable connects the HiRes™ Auria™ Processor just below the program switch.
Removing the Auria Accent Color Headpiece Cap: • Place index finger underneath Auria Headpiece Cap • Hold cable gently at the base of the Auria Headpiece with one thumb • Slide other thumb under the raised portion of the color cap • Gently pull up Replacing the Auria Accent Color Headpiece Cap: • Align color cap with Auria Headpiece • Gently place cap onto the headpiece until it magnetically attracts Removing the Auria Accent Color Cover: • Unplug cable • Slide finger between the color cover at the bottom
1. Auria Standard Earhook When using the Auria™ Standard Earhook, the microphone located at the top of the processor is the input source to the processor. An earmold may be used with the standard earhook to provide added security of the processor on the ear. 2. Auria T-Mic The Auria T-Mic is an integrated earhook and microphone combination. The microphone is omni-directional (accepts sound from all directions) and is designed to fit in the open bowl portion of your ear.
Auria Direct Connect Cable This cable comes in 3 different lengths and is designed to connect to a variety of assistive listening devices such as FM Systems, Infrared Systems, and CD Players. These audio sources typically require a custom-made patch cable available either from the manufacturer of these devices or from an electronics store. The cable has a 3.5mm stereo audio jack at one end and a custom miniature connector at the other end that plugs into a connector on the top of the earhook.
FIGURE 10: Connecting the cable to the Auria Direct Connect Earhook Auria T-Coil The Auria T-Coil provides access to private and public loop systems found in the cinema, meeting rooms, or in the theater. Attaching the Auria T-Coil to the Direct Connect Earhook • To place the Auria T-Coil on the Direct Connect Earhook, align the Auria T-Coil as shown in the photograph below (figure 11).
• The Auria T-Coil can be rotated 90 degrees to the left or to the right from its upright position to optimize reception for a given location or device (figure 14). FIGURE 14 ENVIRONMENTAL NOISE: Telecoils are known to be sensitive to magnetic noise generated by most industrial lighting fixtures, store, bank and airport security scanners, power transformers, motor starters, and monitor screens; both flat panel and CRT’s.
FIGURE 15: Auria FireFly To remove earhooks: • Turn the earhook accessories slightly more than a 1/4 turn in either direction until it pops off. FIGURE 16: Removing Auria Earhooks To replace earhooks: • To replace the earhook accessories • Align the earhook so it is flush with your HiRes Auria Processor. • Check to make sure the orange o-ring is in place at the base of the HiRes Auria Processor. Hold the earhook at the base. • Push on until it lightly snaps in place.
System Sensor The System Sensor is a handheld accessory which checks: • Auria Sound Processor communication with the implant The Auria does not need to be removed before testing its functionality. Simply hold the tip of the System Sensor very close to the headpiece, depressing the button on the Sensor. The Sensor will then display various colored LED patterns (refer to chart below). The System Sensor is functional if the orange light illuminates when the button is depressed.
Check Auria PowerCel Charge and Lock Status In order to check the Auria PowerCel charge and lock status in children, observe the status of the Auria FireFly (refer to Auria FireFly description under Earhook Options). Replacing the Auria PowerCel: • Slide the Auria PowerCel forward while gently holding the processor and color cover. • Guide the Auria PowerCel onto the tracks on the HiRes Auria Processor.
FIGURE 19: Auria PowerPak with Huggie To connect the Auria PowerPak: • Slide the Auria PowerCel off the processor • Remove color cover • Slide the Auria PowerPak onto the tracks of the processor and push latch up to lock • Place short color cover on processor To disconnect Auria PowerPak: • Remove the Auria Headpiece and cable • Remove color cover • Pull latch down to unlock by placing your fingers on either side of the latch or your fingernail in the groove at the bottom of the latch.
Using the Auria PowerPak The Auria Huggie can be used to help stabilize the HiRes Auria Processor on the ear while using the Auria PowerPak. Preparing your Auria PowerPak for use with the Plug or Huggie To attach the Auria PowerPak Plug or Huggie: • Gently push the Auria PowerPak plug or Huggie into open slot at the bottom of the Auria PowerPak. • Place screw in top of the plug or Huggie • Using #2 or 1/8” flat blade screwdriver gently tighten the screw on top of the Auria PowerPak adapter.
Using the Telephone Your audiologist will indicate when you should begin to use the telephone with your HiRes Auria Processor. You can use the telephone by placing the receiver directly over the microphone located in the earhook of your HiRes Auria Processor or directly over your ear when wearing the Auria T-Mic. You may find the Auria T-Mic beneficial for you in particularly noisy situations. Practice with several phones, some with adjustable volume, to find what works best for you.
Part II: Care and Maintenance of your HiRes Auria Processor Overview Although your HiRes Auria Processor has been designed and built to withstand daily wear and tear, care must be taken to protect the external components of the device. For a detailed discussion of warnings and precautions please refer to the Package Insert located at the back of this guide. It is a good idea to carry the User Identification Card with you at all times.
Electro-Static Discharge Your HiRes Auria and its attachments are designed to withstand most static events without damage or interruption to your programs. However, there is a chance that high levels of static electricity will generate extreme electrostatic discharge events that may damage the electronic components such as the ones used in the cochlear implant systems.
• When possible, remove your external equipment prior to removing sweaters. • The screens of televisions and computer monitors are highly charged and contact is a problem for two reasons. First, the charge on screens can cause sparks. Second, brushing or touching a screen can transfer charge that will then discharge when you come in contact with another object or person. • Use fabric softener when washing clothes and bedding, this will reduce the likelihood of charge generation.
Regenerating the Dri-Aid Function Remove the insert (Figure 23) from the Auria Carrying Case and place on a cookie sheet in a heated oven (200°F/93°C) for approximately 1 1/2 to 2 hours. FIGURE 23 CAUTION: Do not put the outer case or the Auria and any of its accessories in the oven, only the insert is designed to be heated. CAUTION: Do not heat over 260°F/126°C or the silica crystals may become damaged.
If the rechargeable Auria PowerCel is dropped, look at it for evidence of damage or cracking. If any evidence of damage is seen, the Auria PowerCel should be disposed of immediately. WARNING: The Auria PowerCel used in this device may present risk of fire or chemical burn if mistreated. Do not dissemble, heat above 100°C / 212°F or incinerate. Dispose of used Auria PowerCels appropriately. Never put PowerCels in mouth. If swallowed, contact your physician or local poison control center immediately.
Charging the Auria PowerCels: The following section describes assembling the charger and inserting the rechargeable Auria PowerCels in the charger. Assembling the Charger: Place the charger on a flat surface: FIGURE 24: Charging Bay on Flat Surface Select the power plug appropriate for your location. FIGURE 25: Power Supply Adapters Connect the power plug to the power supply. FIGURE 26: Connecting the Adapters to the Power Supply To Outlet Connect the cable from the power supply to the charger.
FIGURE 27: Connecting the Power Supply to the Charger To Charger Insert the power plug into the wall outlet. A green light indicates proper connection. Inserting the Auria PowerCels into the Charger: Locate the slide tracks on the charger. FIGURE 28: Inserting Auria PowerCel into the Charger Position the Auria PowerCel so that the contact is facing the top wall where the pins reside. Slide the Auria PowerCel onto the charger until it engages.
NOTE: If you place a partially charged Auria PowerCel in the charger, the Auria PowerCel may be fully charged in a shorter period of time. You can remove the Auria PowerCel at any time. The charger and Auria PowerCels will not be damaged if the Auria PowerCels remain in the charger longer than the required charging time. It is a good idea to rotate the Auria PowerCels in daily use in order to maximize Auria PowerCel life.
Using the PowerCel Charger Car Adapter (AB-5620-002) After inserting the car adapter into your car’s cigarette lighter, connect the cable from the car adapter to the charger.
Part III – Assistive Listening Devices Overview Assistive listening devices such as FM systems and Infrared systems can help to improve speech understanding, particularly in difficult listening situations. These devices reduce the effect of distance between the sound source and the listener. Personal FM Systems The HiRes Auria Processor can be used with a personal FM system by connecting the FM system to the Auria Direct Connect Cable.
Troubleshooting Tips • Ensure that the appropriate patch cable for the make and model of FM system is being used. Do not substitute cables with unknown properties without first consulting your implant-care professional, Advanced Bionics or the FM manufacturer. • Proper care of the patch cable (i.e. avoid sharp bending of the cable) will maximize it’s life. Infrared Systems Infrared systems use invisible light-waves to transmit signals such as speech or music.
Troubleshooting Tips • Ensure that the appropriate patch cable for the make and model of infrared system is being used. Do not substitute cables with unknown properties without first consulting Advanced Bionics or the infrared systems manufacturer. • When the infrared systems manufacturer and/or Advanced Bionics have made specific setting recommendations, they have been made under specific conditions.
• Ensure that the appropriate patch cable has been obtained for the make and model of audio-appliance (i.e. CD player, Walkman) and HiRes Auria Processor. • With the audio-appliance in the off position and the processor turned down, attach the appropriate ends of the patch cable to their respective input/output sockets. The ends of the cable should be appropriately marked, as the attenuated end of any cable should be closest to the processor.
Part IV: Troubleshooting Your HiRes Auria Processor The following is a description of how to troubleshoot your HiRes Auria Processor. If a problem persists after trying the suggestions below, contact your implant center, service center or Advanced Bionics for support. No Sound Heard Ensure that the cable is inserted into the HiRes Auria Processor and the Auria Headpiece is properly positioned over the implant site. Ensure that you are using a charged Auria PowerCel.
Auria Headpiece or HiRes Auria Processor Gets Wet Remove the Auria PowerCel immediately. Drain as much excess water as possible from the processor or headpiece. Place the processor and/or Auria Headpiece in the Auria Carrying Case immediately. Contact your cochlear implant center or Advanced Bionics for further instructions.
Problems with Adherence of the Auria Headpiece Cap to the Head • Discuss the possibility of increasing magnet strength with your audiologist. Maintaining Stability Behind the Ear • Depending on the earhook option used, an earmold or commercially available huggie may provide additional security for the processor on the ear. Please consult your implant audiologist for their recommendation.
Part V: Contact Us Advanced Bionics is committed to providing the highest quality products and service to our customers. We welcome your comments about the HiRes Auria Processor or your suggestions to improve the product. Please feel free to contact Advanced Bionics or discuss your suggestions with your implant professional. Headquarters Advanced Bionics, LLC 12740 San Fernando Road Sylmar, CA 91342 USA 877.829.0026 in USA and Canada 661.362.1400 661.362.1500 Fax 800.678.3575 TTY info@AdvancedBionics.
Technical information will be provided upon request. Advanced Bionics®, CLARION®, HiRes®, Auria®, T-Mic™, FireFly™, Auria® PowerCel™, Auria® PowerPak™ and CII BTE™ are trademarks of Advanced Bionics Corporation in the United States of America and other countries. This device is protected under one or more of the following U.S.
www.BionicEar.com Headquarters Advanced Bionics, LLC 12740 San Fernando Road Sylmar, CA 91342 USA 877.829.0026 in USA and Canada 661.362.1400 661.362.1500 Fax 800.678.3575 TTY info@AdvancedBionics.com Europe Advanced Bionics SARL 76 rue de Battenheim 68170 Rixheim, France +33.89.65.98.00 +33.89.65.50.05 Fax europe@AdvancedBionics.com Asia-Pacific Advanced Bionics Asia-Pacific Limited Suite 4203 42/F, Tower One, Lippo Centre 89 Queensway, Hong Kong 852.2526.7668 852.2526.7628 Fax AP@AdvancedBionics.
