Tools for Schools Auria® Sound Processor Product Guide For Educators, Therapists, and Families Auria Sound Processor The Auria Sound Processor was designed with children in mind. Advanced signal processing and Autosound™ (a wide sound window) provide optimal listening in a noisy classroom while allowing a child to experience language naturally. The Auria Processor is lightweight, stylish, water tolerant, and impact resistant.
Built-in Microphone Volume Control Program Switch Processor Module Headpiece Cable Connector T-Mic® Microphone Earhook PowerCel™ Rechargeable Battery Accent Color Cover Headpiece and Cable with Color Cover Quick-Start Guide and System Checks: Step 1: Slide the fully charged PowerCel into position on the Processor Module. This will turn on the Auria Sound Processor. Check to ensure that the PowerCel is in a fully aligned position with the Processor Module.
Auria Features Program Switch The Auria Processor can store up to three (3) programs (P1, P2, P3). The Program Switch has three positions to represent each program. P1 is at the bottom, P2 is in the middle, and P3 is at the top. P1 P2 P3 Auria Program Switch Volume Control Volume Control allows the loudness level to be adjusted. Turning the control in a clockwise direction increases the loudness; turning the control counterclockwise decreases the loudness.
Power Options The PowerCel Battery is used to power the Auria Processor. There are two types of PowerCel Batteries that can be used with the Auria Sound Processor: the PowerCel™ Slim or PowerCel™ Plus. The PowerCel Plus is larger than the PowerCel Slim and provides increased operating time before a battery change is needed. PowerCels can be fully recharged in 4–5 hours and do not need to be fully depleted before recharging.
Earhook Options Standard Earhook The standard Earhook is the basic hook that holds the Processor on the child’s ear. With this Earhook in place, the built-in Microphone, located at the top of the Processor, is active. The Earhook comes in Standard and Small sizes. Standard and Small Earhook T-Mic® Microphone The T-Mic Microphone is an integrated Earhook and Microphone combination.
iConnect™ Adapter The iConnect Adapter allows a wireless connection to a miniature personal FM receiver. The iConnect does not come standard in the child’s Auria Processor Kit but can be purchased separately through Advanced Bionics. FireFly The FireFly Earhook has a built-in LED (light emitting diode), which provides visual feedback regarding the Processor functions and program settings.
Audio-Mixing Audio-Mixing refers to the amplification ratio between the Processor Microphone and an auxiliary input device. Audio-Mixing allows the child’s Processor Microphone to remain on when connected to an auxiliary input, such as an active T-Coil, FM System, or iPod, with a Direct Connect Earhook/Cable. This is important because it enables the child to hear his own voice and sounds around him in addition to the input from the auxiliary device.
Accessories for the Auria Auxiliary Microphone • The Auxiliary Microphone, also called a lapel microphone, is an additional microphone that can be used in a number of ways. The Auxiliary Microphone plugs into the auxiliary input jack of the Direct Connect Cable and is for use: • uring therapy or in noisy environments, as it improves the signal-to-noise D (S/N) ratio. • As a way to troubleshoot the child’s Processor.
Auria Processor Troubleshooting Determining Device Function System Sensor The System Sensor, a handheld device that performs a system functionality test, is for use with the Auria, Platinum BTE/CII BTE, PSP, and S-Series Sound Processors. The System Sensor is powered by a lithium battery, which needs to be replaced approximately every two years. To Use the System Sensor: Place the System Sensor over the Headpiece at a distance of approximately one (1) to two (2) inches, then gently press the button.
Completing a Microphone Check To test the internal Microphone of Auria, you will need to use a mini amplified speaker (available from an electronics store). You should perform a microphone test when the Processor is new, to establish a baseline from which you can monitor the internal Microphone for any sound-quality issues. The microphone test only assesses the internal Microphone of the Processor and will not provide information about the Headpiece Cable or T-Mic.
Troubleshooting If you suspect a problem with a child’s cochlear implant externals, we recommend that you verify the following items before proceeding to the Troubleshooting chart located on the next page: 1. Make sure the child’s Processor is set to their user settings. 2. • I s the battery in place and were there 3–4 blinks from the FireFly Earhook following proper battery placement? • Is the Volume Control in the correct position? Visually inspect the child’s equipment.
Auria Troubleshooting Situations: Problem Action Child cannot hear (No Sound) 1. 2. 3. FireFly not flashing 4. Verify Processor control settings. Remove and replace battery to reset the Auria Processor. Visually inspect equipment and check that connections are secure. Apply the System Sensor to check the system status: Solid Green light: • Try another T-Mic (If applicable). • Try another program. • Test Microphone (refer to the section Completing a Microphone System Check for details).
Using Personal FM Systems with the Auria® Sound Processor What is an FM System? An FM (Frequency Modulated) system is a wireless communication technology commonly used in the classroom to overcome the adverse effects of distance and competing noise. Connecting the Child’s Auria to an FM System: 1. Ensure that you have obtained the appropriate FM equipment, such as iConnect Adapter, FM Receiver, FM Transmitter and Batteries (size 10 for the iConnect).
Tips to Reduce Interference: 1. Ensure that the transmission range is not exceeded. The broadcast range between FM transmitters and receivers may begin to break up at distances greater than 40 feet indoors and 120 feet outdoors. 2. Observe areas in the classroom, or other environments, that can cause “dead spots” in transmission. Complete a listening check with the FM System in the classroom to listen for any problem areas; avoid seating the child in these problem areas.
FM Troubleshooting Situations: Problem Action Child cannot hear when the FM System is connected 1. Verify that the Auria Sound Processor is on and at user settings. 2. Verify that the FM System is working, check battery and settings. 3. Verify that your connections are secure. 4. If using the Direct Connect option, verify that you are using the proper FM Adapter Cable. 5. Verify that the Audio-Mixing ratio has been set for FM use (50/50 is recommended for classroom use). 6.
FM Manufacturer Resource Information Phonak Inc, US Phone: 800.679.4871 • 630.821.5000 info@phonak.com www.phonak-us.com Advanced Bionics® Phone: 877.829.0026 TTY: 800.678.3575 Monday – Friday 5 a.m. to 5 p.m. PST Toolsforschools@AdvancedBionics.com www.BionicEar.
Headquarters Advanced Bionics, LLC 12740 San Fernando Road Sylmar, CA 91342 USA 877.829.0026 in USA and Canada 800.678.3575 TTY 661.362.1400 661.362.1500 Fax info@AdvancedBionics.com Europe Advanced Bionics SARL 76 rue de Battenheim 68170 Rixheim, France +33.3.89.65.98.00 +33.3.89.65.50.05 Fax europe@AdvancedBionics.com Asia-Pacific Advanced Bionics Asia-Pacific Limited Suite 4203, 42/F, Tower One Lippo Centre, 89 Queensway Hong Kong 852.2526.7668 852.2526.7628 Fax AP@AdvancedBionics.
