Use Instructions

You can reject or end a call with a long press on the upper or lower part of the multifunction button on
the sound processor or directly through the phone.
FPO Image
Streaming Audio via Bluetooth with the Naída CI M30
After successful pairing of your processor(s) to your Bluetooth-enabled device, ensure that your device
is not muted and volume is not set to minimum. Then, simply start the audio on the Bluetooth-enabled
device and the sound processor will start streaming the audio. Environmental balance and access to
surrounding sounds can be managed using the multifunction button, the AB Remote mobile application,
or the Phonak RemoteControl.
Pairing the Naída CI M30 to Phonak Accessories
Your Naída CI M30 can be paired to the following Phonak accessories:
 Phonak RemoteControl
 Phonak TV Connector
 Phonak PartnerMic
 Phonak Roger transmitters
 Phonak Naída Link M hearing instrument
Please refer to the accessory user guide for initial setup and pairing instructions.
Switching between Multiple Audio Sources with the Naída CI M30
A phone call from a Bluetooth-enabled device has highest priority and will pause other audio streaming
from a connected device. In order to switch audio streaming source, simply pause the audio from the
current source and start streaming from another source.
Placing the Naída CI M30 in Flight Mode
The Naída CI M30 communicates wirelessly with other devices in the 2.40 GHz to 2.48 GHz frequency
range. When flying, some operators require all devices to be switched into flight mode. Entering flight