User's Manual
Project
DATE
22/06/20
TCU-FITAX-3.5
FCC Certification
REFERENCE
LEVEL
V01.04
SHEET
15/45
Link to TOP INDEX
BY
MVT
Version:
V01.00
V01.01
V01.02
V01.03
V01.04
Author:
MVT
MVT
MVT
MVT
MVT
Date:
23/03/20
11/05/20
20/05/20
22/05/20
22/06/20
FICOSA INTERNATIONAL S.A. 2016. This document or its contents may not be communicated
or distributed to third parties or reproduced in whole or in part without the express permission of FICOSA
4. DSRC OBU Power up Procedure
The DSRC OBU must be powered up at 12 V. In case the maximum Amperage was
to be limited, it would be set, at least, to 1 A. Note that positive (Red), IGN Line (Blue)
and negative (Black) line connectors must be plugged to the power source as shown
below.
Figure 13. DSRC OBU Power up using Power Supply