Operation and Maintenance Manual

silencer. The Ti-RANT 45-M enables reliable semi-automatic operation on
most contemporary locked-breech host pistols through the use of AAC's
A.S.A.P. System. A variety of A.S.A.P. accessory pistons are available to
accommodate the majority of muzzle threads found on popular 9mm Luger,
40 S&W, and 45 Auto host pistols in today's marketplace. Additionally, a
fixed barrel spacer and three-lug adapter are available for adapting the Ti-
RANT 45-M for use on fixed (non-moving) barrel, carbines and hosts that
are equipped with a 3-lug barrel machined to original H&K specifications.
INSTALLING YOUR Ti-RANT 45-M ON A HOST FIREARM
1. Always keep the firearm pointed in a safe direction.
2. Render the firearm safe by removing the magazine, completely unload-
ing the firearm and engaging the safety to the "SAFE" position. See the
firearm's owner's manual for detailed instructions.
3. Remove the thread protector from the muzzle.
4. Inspect the muzzle threads to verify they are clean and undamaged
5. Inspect the threads in the rear of the A.S.A.P.™ piston to verify they are
clean and undamaged.
6. Look through the silencer from the rear to insure the bullet path through
the silencer is unobstructed.
7. Examine the silencer for any signs of damage.
NOTE: All A.S.A.P. pistons are marked with the thread size and pitch of
the threads in the rear of the piston shaft as well as a directional arrow in-
dicating the direction of rotation to properly install the piston/silencer on
the host firearm muzzle threads. See Figure 1.
8. Carefully screw the silencer onto the host firearm's muzzle threads in
the “ON” direction indicated on the piston. See Figure 2.
9. Tighten the silencer by hand in the direction indicated on the piston with
sufficient torque to keep the silencer securely threaded onto the barrel
during operation.
WARNING! Never attempt to attach a Ti-RANT 45-M silencer to muzzle
threads that are dirty or dam-
aged, as this may lead to
property damage, personal
injury and/or death.
WARNING! Never attempt to
attach a Ti-RANT 45-M si-
lencer with dirty or damaged
A.S.A.P. piston threads to a
firearm, as this may lead to
property damage, personal
injury and/or death.
WARNING! Never use a si-
lencer with an obstructed
bore, as this may lead to
property damage, personal
injury and/or death.
WARNING! It is the responsi-
bility of the user to insure the
silencer stays securely
threaded to the barrel of the
host firearm during use. Fail-
ure to insure the silencer
stays securely threaded to
the host firearm may lead to property damage, personal injury and/or
death.
VERIFYING SECURE INSTALLATION OF YOUR Ti-RANT 45-M
1. Always keep the firearm pointed in a safe direction.
2. Render the firearm safe by removing the magazine, completely unload-
ing the firearm and engaging the safety to the "SAFE" position. See the
firearm's owner's manual for detailed instructions.
CAUTION! Silencers can become extremely hot while the host firearm
is being shot. Heat-resistant gloves must be worn when verifying the
security of the installation of a Ti-RANT 45-M silencer on the host
firearm. Handling a hot silencer without heat-resistant gloves may
lead to skin burns and/or personal injury.
SILENCER MODEL Ti-RANT 9-M P.3 SILENCER MODEL Ti-RANT 9-M P.4
Figure 1
Figure 2
Note “ON”
rotation as
marked.