Operation and Maintenance Manual

THE TEN COMMANDMENTS OF FIREARM SAFETY
1. Always keep the muzzle pointed in a safe direction.
2. Firearms should be unloaded when not actually in use.
3. Do not rely on your firearm's safety.
4. Be sure of your target and what is beyond it.
5. Only use ammunition that exactly matches the markings on your
firearm.
6. If your firearm fails to fire when the trigger is pulled, handle with
care.
7. Always wear eye and hearing protection when shooting.
8. Be sure the barrel is clear of obstructions before shooting.
9. Do not alter or modify your firearm and have it serviced regularly.
10. Learn the mechanics and handling characteristics of your firearm.
Read your firearm's instruction manual.
WARNING! Failure to follow the instructions and recommendations
set forth in this manual can create a potentially dangerous situation
for the user and surrounding personnel, possibly leading to property
damage, personal injury and/or death.
WARNING! DO NOT shoot through a Ti-RAID 30 silencer that is
mounted on a BLACKOUT
®
Silencer-Mounting muzzle device that has
not been installed onto the host rifle using the included Rocksett
sealant and recommended torque fastening. Mounting and shooting
through a Ti-RAID 30 silencer that is mounted to an unsecured
BLACKOUT Silencer-Mounting muzzle device could lead to property
damage, personal injury and/or death.
WARNING! DO NOT use an auxiliary thread adapter between your
host weapon barrel and a BLACKOUT Silencer-Mounting muzzle de-
vice. Using an auxiliary thread adapter between your host weapon
barrel and a BLACKOUT Silencer-Mounting muzzle device could lead
to misalignment between the host weapon bore and the Ti-RAID 30
silencer, which could lead to property damage, personal injury and/or
death.
WARNING! We recommend having your BLACKOUT Silencer-Mount-
ing muzzle device installed by a competent gunsmith or armorer. Nei-
ther Advanced Armament Corp. nor its affiliates are liable for
damage(s) to the host weapon, silencer , and user attributed to im-
proper installation. An improperly installed or misaligned BLACKOUT
Silencer-Mounting muzzle device can create a potentially dangerous
situation for the user and surrounding personnel, and may lead to
property damage, personal injury and/or death.
WARNING! Always wear protective gear, such as eye protection and
solvent-resistant gloves when working with any solvent. Only use sol-
vents in a well-ventilated area away from open flames. Unsafe use of
solvents may lead to property damage, personal injury and/or death.
WARNING! DO NOT use a crush washer or compression washer
when installing a BLACKOUT Silencer-Mounting muzzle device. In-
stalling a BLACKOUT Silencer-Mounting muzzle device with a crush
washer or compression washer can lead to misalignment of a BLACK-
OUT Silencer-Mounting muzzle device and the host weapon bore.
Misalignment of a BLACKOUT Silencer-Mounting muzzle device and
the host weapon bore can create a dangerous situation that may lead
to property damage, personal injury and/or death.
WARNING! Never install or remove a silencer on or from a host
firearm that you have not verified to be completely empty and ren-
dered safe. Installing or removing a silencer on or from a loaded
firearm may lead to property damage, personal injury and/or death.
WARNING! The Ti-RAID 30 is designed for use on modern rifles and
carbines in serviceable condition. It is the user's responsibility to en-
sure the intended host firearm is in serviceable condition. Using a Ti-
RAID 30 on firearms that are not in serviceable condition can lead to
property damage, personal injury and/or death.
WARNING! The barrel threads must be properly machined to allow
proper attachment of a BLACKOUT Silencer-Mounting muzzle device.
The use of an improperly threaded barrel with a BLACKOUT Silencer-
Mounting muzzle device may lead to property damage, personal in-
jury and/or death. For further clarification on muzzle threads, contact
ADVANCED ARMAMENT CORP. at 770-925-9988.
WARNING! The bore through your Ti-RAID 30 must align concentri-
cally with the bore of the barrel to which it is mounted. A misalign-
ment of the silencer and barrel bore may lead to property damage,
personal injury and/or death.
WARNING! Discharging silenced firearms can make airborne and/or
SILENCER MODEL Ti-RAID 30 P.1 SILENCER MODEL Ti-RAID 30 P.2