Instruction Manual

3. Once the core assembly and tube have been separated, the two can be
screwed back together by hand. DO NOT use the PRODIGY™
disassembly tools to reassemble or tighten the core assembly and tube,
as over-tightening the tube to the core assembly can make future
disassembly difficult. See Figure 3.
4. The PRODIGY™ may now be re-installed on the host firearm. See
“Installing a PRODIGY™ Silencer” in these instructions.
CLEANING A PRODIGY™ SILENCER – Every 600 Rounds - It is
recommended that users dismount the PRODIGY™ silencer from the host
firearm after every 600 rounds of use, separate the tube and core assembly, and
perform a complete and comprehensive cleaning.
WARNING! – Only perform disassembly, cleaning, and maintenance procedures
on silencers that are not mounted to a firearm. Attempting to clean or perform
maintenance on a mounted silencer could lead to property damage, personal
injury and/or death.
FIGURE 2
FIGURE 3