Operation and Maintenance Manual

3. Remove the thread protector from the muzzle.
4. Inspect the muzzle threads to verify they are clean and undamaged.
WARNING! Never attempt to attach an AVIATOR 2 to muzzle threads
that are dirty or damaged, as this may lead to property damage, per-
sonal injury and/or death.
5. Inspect the threads in the rear of the A.S.A.P.™ piston to verify they are
clean and undamaged.
WARNING! Never attempt to attach an AVIATOR 2 with dirty or dam-
aged threads to a firearm, as this may lead to property damage, per-
sonal injury and/or death.
6. Look through the silencer from the rear to insure the bullet path through
the silencer is unobstructed.
WARNING! Never use a silencer with an obstructed bore, as this may
lead to property damage, personal injury and/or death.
7. Examine the silencer for any signs of damage.
8. Carefully screw the si-
lencer onto the host
firearm's muzzle threads
in the direction indicated
in Figure 1.
9. Tighten the silencer by
hand in the direction in-
dicated on the piston
with sufficient torque to
keep the silencer se-
curely threaded onto the barrel during operation.
WARNING! It is the responsibility of the user to insure the silencer
stays securely threaded to the barrel of the host firearm during use.
Failure to insure the silencer stays securely threaded to the host
firearm may lead to property damage, personal injury and/or death.
VERIFYING SECURE INSTALLATION OF YOUR AVIATOR 2
1. Always keep the firearm pointed in a safe direction.
2. Render the firearm safe by removing the magazine, completely unload-
ing the firearm and engaging the safety to the "SAFE" position. See the
firearm's owner's manual for detailed instructions.
CAUTION! Silencers can become extremely hot while the host firearm
is being shot. Heat-resistant gloves must be worn when verifying the
security of the installation of an AVIATOR 2 on the host firearm. Han-
dling a hot silencer without heat-resistant gloves may lead to skin
burns and/or personal injury.
3. Carefully tighten the silencer onto the host firearm's muzzle threads in
the direction indicated in Figure 1.
REMOVING YOUR AVIATOR 2 FROM A HOST FIREARM
1. Always keep the host firearm pointed in a safe direction.
2. Render the firearm safe by removing the magazine, completely unload-
ing the firearm and engaging the safety to the "SAFE" position. See the
firearm's owner's manual for detailed instructions.
3. Verify the silencer is at ambient temperature. If the silencer is hot, allow
it to cool.
CAUTION! Never handle a hot silencer without heat-resistant gloves,
as this may lead to skin burns and/or personal injury.
4. Carefully unscrew the si-
lencer from the host
firearm's muzzle
threads. See Figure 2.
DISASSEMBLING YOUR
AVIATOR 2
The AVIATOR 2 should be
disassembled for cleaning
after every 500 rounds of
SILENCER MODEL AVIATOR 2 P.3 SILENCER MODEL AVIATOR 2 P.4
Figure 1
Figure 2