Technical Specifications

(6 slides. Table min. lgth. 30”)
____ TA-45 . . . . . . . . . .K.D. Aluminum Glass Rack Slides
(3 slides. Table min. lgth. 3 feet)
____ TA-46 . . . . . . . . . . . . . . . . . . . . . . . . . . . .Door Locks
____ TA-48 . . . . . . . . . . . . . 12”x12” Cut-Out in Back Panel or
Undershelf for Plumbing
____ TA-55 . . . . . . .Remove Back Panel (on Enclosed Base)
____ TA-70 . . . . . . . .S/S Tubular Tray Divider (
12” sections)
____ TA-73 . . . . . . . . . . . .Tubular Tray Slide w/Dropdown
(Stationary Tray Slide Available. Factory installation only)
____ TA-74 . . . . . . . . . . . . . . . . . . . . . . . .Solid Tray Slide
____ TA-92 . . . . . . . . . . . . . . . .12” Apron (in front of sink)
____ TA-92A 17" stainless Steel Apron to Cover Sink Bowls and
Support Lever Drain Handles
____ TA-109 . . . . . . . . . .Rear Flush Finished Inset Panel
TA-109 Shown
____ TA-116 Adjustable Enclosed Base Cabinet Mid Shelf
\Shelves over 36" in length require multiple . . . .sections with center partition.
____ TA-107 . . . . . . . . .Vacuum Breaker Holes on Tables
(Includes Backsplash with 2" Return)
____ TA-9 . . . . . . . . . . . .1-1/2” Turn-Up for Undershelves
____ TA-48 . . . . . . . . . . . . . 12”x12” Cut-Out in Back Panel or
Undershelf for Plumbing
____ TA-94 . . . . . . . .Upgrade 16 Ga. 304 S/S Undershelf
____ TA-366 . . . . Reinforced Understructure For Undershelves
____ TA-9A . . . .1” Turn-Up for all Table Mounted Shelves
____ TA-47 . . . .Shelf Mounting Bracket for Existing Table
____ TA-49 . . . . . . . . . . . . . . . . . . . . . .Wall Shelf 2” offset
____ TA-60 . . . . . . . . .Special Sizing Charge for Shelves
(Must Order Larger Unit to be Cut Down to Smaller Size)
____ TA-62 . . . . . . .Duplex Electrical Outlet (Under Flat Top)
____ TA-62D Doghouse Electrical Outlet Box (Includes Duplex Outlet)
____ TA-71 . . . . . . . . . . . .Heat Lamp Mounting Provision
____ TA-77 Check Minder Shelf Provision (Factory installation only)
____ TA-99 16 Ga. S/S 304 Upgrade for Wall and Over Shelves
____ TA-102 . . . . . .24” x 24” Extension for Microwave or
Computer Shelf
(Add to OTS and ODS Shelves. See page 45)
____ TA-103 . . . . . . . . . .24” Wide PT Shelf (36” Min Length.
______ Mid mount only. PT Series Shelf)
____ TA-104 . .Additional Length Over 12’ (Add to 18” Shelf)
(CU & CDS Shelving Only. Maximum Length is 14' as Single Piece)
____ TA-16 . . . . . .Galvanized Leg with Plastic Bullet Foot
____ TA-19 . . . . . . . . .Flanged Stainless Steel Bullet Feet
____ TA-20 . . . . .Stainless Steel Leg with S/S Bullet Foot
____ TA-21 . . . . . . . . . . . . . . . .Stainless Steel Bullet Foot
____ TA-95 . . . . . . . .Upgrade 16 Ga. 304 S/S Legs Only
Sink Modifications
Undershelf Modifications
Overshelf Modifications
Leg Modifications
TA-77 $45 lin. ft.
Check Minder Shelf Provision
NSF Partition
5" TA-56A $369
18" NSF Partition
TA-92 $135 lin. ft.
12" Apron
PRT-1 $663
Printer Shelf with
Data Port & Electrical Outlet
TA-112 $470
Hubble Outlet
Duplex Electrical
Outlets
TA-62 $346 ea.
TA-62A 208 ea.
TA-62B 334 ea.
TA-62C 363 ea.
Doghouse
Duplex Electrical
Outlet
TA-62D
$387 ea.
Data Port
Outlet
TA-622
$346 ea.
MODIFIED EB-SS-3012
CDS-18-144
UCC-1
TA-11A-L
TA-92
DC-1512
TA-34B
TA-27
TA-92
TA-34A
US-30-30
TA-42
Call For Installation of Buyout Equipment!
Smart Table Modifications