Splash Mount Faucets Spec Sheet

TOL ± .125” ALL DIMENSIONS ARE TYPICAL
SPLASH MOUNTED FAUCET ACCESSORIES
REF-G
DIMENSIONS and SPECIFICATIONS
200 Heartland Boulevard, Edgewood, NY 11717-8380
ADVANCE TABCO is constantly engaged in a program of
improving our products. Therefore, we reserve the right to
change specifications without prior notice.
© ADVANCE TABCO, DECEMBER 2015
K-170 - Eye Wash Detail
ALL FAUCET AERATORS
CONFORM TO
ASTM.A112.18.1M
2.0 GPM/7.56 LPM
THREAD: 55/64 - 27 FEMALE
K-240 SERVICE FAUCET
9.6 GPM/36.3 LPM
3/4” HOSE END SPOUT
For Replacement Faucets & Upgrades, Drains & Accessories
visit our website at www.advancetabco.com
All Faucets That Meet 2014 Federal Lead Free Standards
(*Excludes K-240 Service Faucets)
Wrist handle Gooseneck
Hands-Free Wand
K-400
Low Flow Aerator
K-08
K-316
Wrist Handles
Only
K-316-LU
Faucet Wall
Mounting Bracket
K-30
Faucet Mounting Kit
K-1, K-11, K-101, K-105,
K-112, K-119
& K-211
K-06
Repair Kit For
K-1, K-11, K-101,
K-112, K-119
& K-211
K-00
Repair Kit can only be used on fau-
cets purchased after 12/03
K-170
Eye Wash Attachment*
* IMPORTANT: Faucet-mounted eyewashes require two motions to operate (turn on water, pull knob to activate eyewash flow). Therefore, Advance Tabco does not believe
that these units meet the provisions of ANSI Z358.1-2004 as eyewash units. These units are intended solely as supplemental units in addition to dedicated, plumbed
eyewash equipment installed in the workplace.
Faucet-mounted eyewashes should be used with cold or warm water only. Use of hot water might cause scalding. Eyewash Faucets not to be used with Electronic Faucets.