Sleek Shield Cafeteria Style Spec Sheet

FEATURES:
Front glass locks in place at 15º intervals.
Attractive, low profile design & Easy to clean.
Available with 1” tubular stainless steel posts or
1-5/8” stainless steel posts (please specify).
Chamber lock™ is mounted to post in a fixed position.
Includes Two 15-3/8” High Side Panels.
1/4” Heat-Tempered Glass Front & Sides.
Includes:
Stainless Steel Shelving Available In 12”, 15” or 18” Widths.
Shelves have two rolled edges on front & rear and square edges
on left & right sides.
Glass Unit features 3/8” Heat-Tempered Glass Top.
CONSTRUCTION:
All TIG welded.
Exposed stainless steel surfaces polished to a satin finish.
MATERIAL:
1/4” Thick Heat-Tempered Side Glass.
3/8” Thick Heat-Tempered Top Glass (GSG Model).
Shelf - 18 Ga., Type 430 Stainless Steel.
1” Post - Stainless Steel.
1-5/8” Post - Stainless Steel.
Chamber Lock™ - Anodized Aluminum.
Finish - Aluminum components manufactured with a standard Satin
Clear Finish. Other colors available for Aluminum Components Only.
Please consult factory for additional colors.
NEW YORK GEORGIA TEXAS NEVADA
Fax: [phone] Fax: [phone] Fax: [phone] Fax: [phone]
www.advancetabco.com
Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.
Email Orders To: [e-mail]. For Smart Fabrication™ Quotes, Email To: [e-mail] or Fax To: 631-586-2933
Sleek Shields
™
CAFETERIA FOOD SHIELDS
WITH STAINLESS STEEL SHELF OR GLASS TOP
Protected by: Patent No. US 9,010,883 B2
Maximum Glass Opening is 1-1/2” From Table to Bottom of Glass
(shown with 1” Anodized Aluminum Posts)
Maximum Glass Opening is 1-1/2” From Table to Bottom of Glass
Max. load for Top Glass is 100 lbs. even distributed wt.
(shown with 1” Anodized Aluminum Posts)
Cafeteria Food Shield
with Stainless Steel Shelf
Cafeteria Food Shield
with Glass Top
REF-K
Advance Tabco’s Revolutionary
“Chamber Lock
™
” System
makes rotating food shields
easier than ever
Meets Latest
NSF Standards
Single Tier with Stainless Steel Shelf Single Tier with Glass Top
Consult Factory for Heat Lamp Modification when mounting to Glass Top Food Shields
*3/8” Thick Heat-Tempered Glass Required For Front
†
Requires a single center post
† †
Requires two center posts
Length
12”
WIDE
15”
WIDE
18”
WIDE
Approx.
Wt.
Approx.
Cu. Ft.
36” NSGC-12-36 NSGC-15-36 NSGC-18-36
50 lbs. 14
48” NSGC-12-48 NSGC-15-48 NSGC-18-48
58 lbs. 18
60”* NSGC-12-60 NSGC-15-60 NSGC-18-60
66 lbs. 22
72”* NSGC-12-72 NSGC-15-72 NSGC-18-72
78 lbs. 26
84”
†
NSGC-12-84 NSGC-15-84 NSGC-18-84
88 lbs. 30
96”
†
NSGC-12-96 NSGC-15-96 NSGC-18-96
99 lbs. 34
108”*
†
NSGC-12-108 NSGC-15-108 NSGC-18-108
111 lbs. 38
120”*
†
NSGC-12-120 NSGC-15-120 NSGC-18-120
127 lbs. 42
132”
†
NSGC-12-132 NSGC-15-132 NSGC-18-132
142 lbs. 46
144”
† †
NSGC-12-144 NSGC-15-144 NSGC-18-144
164 lbs. 50
Length
12”
WIDE
15”
WIDE
18”
WIDE
Approx.
Wt.
Approx.
Cu. Ft.
36” GSGC-12-36 GSGC-15-36 GSGC-18-36
52 lbs. 6
48” GSGC-12-48 GSGC-15-48 GSGC-18-48
64 lbs. 8
60”* GSGC-12-60 GSGC-15-60 GSGC-18-60
72 lbs. 9
72”
†
GSGC-12-72 GSGC-15-72 GSGC-18-72
84 lbs. 11
84”
†
GSGC-12-84 GSGC-15-84 GSGC-18-84
96 lbs. 13
96”
†
GSGC-12-96 GSGC-15-96 GSGC-18-96
110 lbs. 14
108”*
†
GSGC-12-108 GSGC-15-108 GSGC-18-108
122 lbs. 10
120”*
†
GSGC-12-120 GSGC-15-120 GSGC-18-120
135 lbs. 11
132”
†
GSGC-12-132 GSGC-15-132 GSGC-18-132
150 lbs. 12
144”
† †
GSGC-12-144 GSGC-15-144 GSGC-18-144
165 lbs. 10