Self Serve Food Shields Spec Sheet

FEATURES:
Front glass locks in place at 15º intervals.
Attractive, low profile design & Easy to clean.
Supplied with 1” stainless steel posts.
Anodized Aluminum Chamber lock™. Mounted to post in a
fixed position.
Front Glass: 3/8” thick heat-tempered glass
Side Glass: 2 - 21 7/8” wide x 22” high,
1/4” thick heat-tempered glass
CONSTRUCTION:
All TIG welded.
Exposed stainless steel surfaces polished to a satin finish.
NEW YORK GEORGIA TEXAS NEVADA
Fax: [phone] Fax: [phone] Fax: [phone] Fax: [phone]
www.advancetabco.com
Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.
Email Orders To: [e-mail]. For Smart Fabrication™ Quotes, Email To: [e-mail] or Fax To: 631-586-2933
Sleek Shields
™
SELF-SERVE FOOD SHIELDS
Protected by: Patent No. US 9,010,883 B2
REF-K
Meets Latest
NSF Standards
Advance Tabco’s Revolutionary
“Chamber Lock
™
” System
makes rotating food shields easier
than ever
Single Front Glass Model Shown
3/8" Hole
Required
In Table Top
1" Tubular Post
2” Maximum
Thickness
Concealed Fastener
Standard Concealed Mounting Hardware
Requires access below counter for installation.
(Compatible With All Advance Tabco Food Shields)
SG-1
Fits 1” Posts
2” O.A. Diameter
Optional Accessories
Surface Mounting Brackets
Use when access below countertop
is not available.
Model #
Nominal
Length (L)
Clearance
Length (A)
O.A.
Length (B)
Approx.
Weight
Approx.
Cu. Ft.
Single
Front
Glass
GS-36 36” 35” 37 3/4”
47 lbs. 7
GS-48 48” 47” 49 3/4”
57 lbs. 9
GS-60 60” 59” 61 3/4”
67 lbs. 11
GS-66 66” 65” 67 3/4”
72 lbs. 12
Dual
Front
Glass
GS-72
†
72” 71” 73 3/4”
81 lbs. 8
GS-84
†
84” 83” 85 3/4”
91 lbs. 9
GS-96
†
96” 95” 97 3/4”
101 lbs. 10
GS-120
†
120” 119” 121 3/4”
130 lbs. 12
†
Requires a single center post
Verify Center Leg Location. Please Notify Factory If Not Centered.