Equipment Stand Spec Sheet

41 lbs.
52 lbs.
70 lbs.
84 lbs.
99 lbs.
4
6
8
9
11
24”
36”
48”
60”
72”
ES-LS-302-X
ES-LS-303-X
ES-LS-304-X
ES-LS-305-X
ES-LS-306-X
STAINLESS STEEL
16 GA. EQUIPMENT STANDS
REF-O
FEATURES:
TOP is furnished with 1” hemmed edge splash on both sides. Front edge
is a die formed No-Drip V-Edge.
Aluminum die cast “leg to shelf” clamp secures shelf
to leg eliminating unsightly nuts and bolts.
Undershelf is adjustable.
CONSTRUCTION:
All TIG welded. Exposed weld areas finished to
match adjacent surfaces.
Entire Top is mechanically polished to a satin finish
and is sound deadened.
Roll formed embossed galvanized hat channels are secured
to top by means of structural adhesive and weld studs.
Gussets welded to support hat sections.
MATERIAL:
TOP is 16 gauge, Type “430” Series stainless steel.
SHELF is 18 gauge, Type “430” Series stainless steel.
LEGS are 1 5/8” diameter stainless steel with stainless steel bullet feet.
Featuring as Standard:
“THE PROVEN”
ORIGINAL ADVANCE TABCO
Adjustable Undershelf
with Die Cast Leg Clamp
Optional Casters
TA-25ES-X Set of 4
Each Set Supplied w/ 2 Brakes.
(225 lbs. Load Capacity Per Caster)
L 30” Wide Wt. Cu.
Load Capacity = 42 lbs. Per Sq. Ft.
www.advancetabco.com
Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.
For Orders & Customer Service:
Email: [e-mail] or Fax: [phone]
For Smart Fabrication™ Quotes:
Email: [e-mail] or Fax: [phone]
Item #: Qty #:
Model #:
Project #: