User Manual

1.0sec. -
Silent Disarm & Two Steps Door Unlock
Press and hold the button for 1.0 seconds first
then press button.
Trunk Release (Aux 1)
Press and hold for 3 seconds
-
Passive Arming By-Pass
While the system is disarmed
Activate or Deactivate the Remote Start
Press button once.
- Press twice if set to start safety mode.
Running Time Extender
Press and hold for 2 seconds
-
Timer Start
Press the button first then tap Press button.
+
Turbo Mode
Press together & release.
+
Aux 2 Timer Output
Press together & release.
+
Aux 3 Timer Output
Press together & release.
+
Aux 4 Timer Output
Press together & release
+
Switch Code for 2nd Car Operation
Press together & release.
+ Shutdown Diagnostic Press together & release
Level Setting. Press and release F button once.
Light up LCD indicator & Function Setting Press and hold for 1.0 seconds
F
FF
F
LCD Remote Program Setting Press and hold for 3.0 seconds
D. LCD TRANSCEIVER REMOTE CONTROL:
1. Press the F buttons the number of times corresponding to the Level you wish to select; the LCD will display LEVEL
number ( )
2. Press the button while LEVEL number text is still on to perform the command.
Button Direct Access
F x 1 Level 1 F x 2 Level 2 F x 3 Level 3
Arm & Lock
Arm & Bypass the
Shock Sensor
Arm & Bypass the
Tilt Sensor
Hidden Alarm
1 sec.
Silent Arming
Vehicle’s
Status Check
Temperature Check
Disarm & Unlock or
Silent Disarming
Remote Valet ON / OFF Car 1 / Car 2 operation Voltage Check
Trunk Release
(Aux 1)
Aux 2 Aux 3 Aux 4
Remote Start or
Running Time Extender
Timer Start ON / OFF
Daily Timer Start
ON / OFF
F 1 sec
Melody /
Vibration Mode
Power Save Mode
ON / OFF
Button Lock
ON / OFF
Vehicle’s Status Check: Press F button first then press and hold buttons for 1 second. The LCD remote transceiver
will display the current status of the vehicle.