Users Manual

G. TABLE OF ZONE /
ALARM DIAGNOTICS
H. ACTIVE ARMING – LOCK & ARM
Press the button on the transmitter. The alarm arms, doors lock (if connected),
and the siren chirps and parking lights flash once. The
+
ARMED icons, the
text and beeps play to confirm. If Valet Mode* is ON, the
+
icons, the text and tone play on the LCD transceiver. Exit Valet Mode to
arm the alarm normally.
DEFECTIVE SENSOR REMINDER: If the siren sounds 3 chirps and the defective
/ / icon, text will display on the LCD
screen, then you have left a door, trunk, or hood lid ajar. (See feature bank 1-06)
SILENT ARMING: Press and hold the buttons for 1.0 second and the
text t will display on the LCD screen. This will arm your security
system. No chirp sound will be heard and the arm confirmation will be through the
vehicles parking lights only.
WARN-AWAY BY-PASS: Press button twice will arm the security system and
bypass the warn-away and the warn-away icon will disappear and
text and tone play on the LCD transceiver.
Note: The bypass feature is programmed to activate for one arming cycle only. The
security system will return to normal operation during the next arming cycle.
Situation
Situation
LED
On
Duty
Zone 1 (Door Triggered) 1 flashes, break, then repeat
Zone 2 (Trunk Triggered) 2 flashes, break, then repeat
Zone 3 (Hood Triggered) 3 flashes, break, then repeat
Zone 4 (Shock Triggered) 4 flashes, break, then repeat
Zone 5 (Tilt Triggered) 5 flashes, break, then repeat
Zone 6 (Ignition Triggered) 6 flashes, break, then repeat
Click to buy NOW!
P
D
F
-
X
C
h
a
n
g
e
V
i
e
w
e
r
w
w
w
.
d
o
c
u
-
t
r
a
c
k
.
c
o
m
Click to buy NOW!
P
D
F
-
X
C
h
a
n
g
e
V
i
e
w
e
r
w
w
w
.
d
o
c
u
-
t
r
a
c
k
.
c
o
m