User's Manual

2016/7/19
4250 Rev.A
7
Driver Paging (For 2-way remote operation only)
It is useful in the even that someone wants to page the driver of the parked
vehicle, with the ignition switch in the “ off” condition, press the
button
on the windshield antenna once to page the driver, one chirp sounds shall be
emitted from the vehicle and the paging melody continues sounding from
your LCD remote, AND “CAL” show on the LCD remote.
IGNITION CONTROL DOOR LOCKS.
If the vehicle’s door locks have been interfaced to the security system, the system
will automatically lock the vehicle's doors when the ignition is turned “ON” and /or
unlock the vehicle’s doors when the ignition is turned “OFF”.
TRUNK RELEASE
Press and hold
button on transmitter for two seconds to remote control the trunk
release or other electric devices.
CHANNEL 4 CONTROL OUTPUT
Press the
+ buttons on the transmitter to active Channel 3 function
CHANNEL 5 CONTROL OUTPUT
Press the
+
buttons on the transmitter to active Channel 4 function.
CAR LOCATOR
Under Armed mode, press the
button on the transmitter to active car locator
function.
The siren will chirp 6 times. The parking light will flash 12 times, for you to easily
locate
your car.
DOME LIGHT CONVENIENCE DELAY & SUPERVISION
The alarm with a unique feature which will turn on your vehicle dome light as
following:
1. Upon disarming, the interior lights will remain on for 30 seconds.
2. If the vehicle is intruded, the interior light will flash for the same duration as
the siren.
Note: Turn ON the ignition switch or arm the alarm will turn off the dome light.
(Additional installation required)
LCD REMOTE CONTROL TRANSMITTER: XT- 67 LCD