User's Manual

2016/7/19
4250 Rev.A
15
While the power save mode, the LCD remote transceiver “sleep” until a button is
pushed, extends the life of battery. When power save mode is “Off”, the remote
control will wake up periodically to check for messages from the security module.
Stop The Trigger Melody Sound:
While triggering the alarm the LCD screen will alert user through melody sound
and flashing trigger icon, press any button on the LCD remote transmitter to stop
melody sound only, the remote control buttons will not send a command to the
system.
ALARM OPERATING CONDITION:
Function Siren Parking
Lights
LED Doors Starter
Disable
Dome
Light
1. Arm 1 Chirp 1 Flash Slow
flash
Locking On
2. Disarm 2 or 4
Chirps
2 or 3
Flashes
Off or
fast
flash
Unlocking Off On for
30 sec
3. Trigger Alarming Flashing Slow
flash
On flashes
4. Panic Alarming Flashing Slow
flash
Locking On flashes
5.Car
Locator
6 Chirps 12
Flashes
ALARM INDICATORS
CHIRP INDICATORS: PARKING LIGHTS:
Chirp Function Parking Light Function
1 chirp Arm 1 flash Arm
2 chirps Disarm 2 flashes Disarm
3 chirps Defective
reminder
3 flashes Disarm/
Intrusion
4 chirps Disarm/
Intrusion
12 flashes Car
Locator
6 chirps Car Locator
LED INDICATORS:
LED Function LED Function
Off Disarmed 2 flashes... Trigger on trunk/hood