User's Manual

2016/7/19
4250 Rev.A
14
transmitter to a second vehicle, follow the instructions for Transmitter programming.
All programming parameters are the same except for the following:
For Regular Remote Control Transmitter:
Prior to press any button on the transmitter. Press the
+ first on the
standard transmitter.
Once
+ button is pressed the LED on the transmitter will illuminate for 3.5
seconds. While the LED is illuminated, press the button for the function you want to
operate on the standard remote transmitter to control a second vehicle security
system.
For 2-way LCD Remote Control Transceiver:
2nd
Car Operation: While the “II” icon display on the LCD screen, you can remote
control and communicate with a second Autopage security system by same 2-way
LCD remote.
1. Press and hold
+ button until 2 beeps
heard then release the
+ button.
See 2-way LCD HHU program mode –
2nd car option.
2. Within 5 seconds press and release
button, C2 show on LCD display, press
confirm CAR 2 operation (II icon On
mean 2nd car operation).
3. To exit programming mode, take no
action for five seconds. The remote
control will exit automatically.
Back to first Car Operation:
This will allow you to control and communicate with the first Autopage system.
1. Press and hold
+ button until 2
beeps heard then release the
+
button.
See 2-way LCD HHU program mode
2. Within 5 seconds press and release
button until C1 show on LCD display,
press
button confirm CAR 1
operation (II icon disappear from LCD
display).
3. To exit programming mode, take no
action for five seconds. The remote
control will exited automatically.
Power Save Mode: