User's Manual

Replacing Remote Control Batteries

2 Way LCD Remote Control - Part # CATLCD

The AAA battery inside the 2-way LCD remote control should last approximately

6 months under normal use. When the battery becomes weak you will notice the

remote control range (the distance from the vehicle the remote control will work)

deteriorate and the BATTERY icon on the LCD remote control will show 1 bar or less.

1. Gently slide the battery cover off of the remote control.

2. Remove the old AAA battery, observing the +/- symbols on the

battery, and replace with a new AAA battery.

3. Gently slide the battery cover on to the back of the remote control.

4. Test operation of the remote control.

2 Way LED Remote Control - Part # CATRLCD (CA2RELCD Only)

The battery inside the 2 way LCD remote control is rechargeable, use the supplied

battery charger to charge the battery until the battery icon on the LCD screen shows

3 bars indicating charging is complete. It is recommended that the battery be fully

charged before normal use.