User's Manual

Manually Overriding Your system - Using the Custom Code:

Assuming the override code programmed has not been changed, and the default

override code of 11 is in the system’s memory.

1. Enter the vehicle and turn the ignition switch to the on position.

NOTE: The siren will sound.

2. Within 5 seconds, press and release the Receivers push-button switch 1

time.

3. Within 5 seconds, turn the ignition switch off then on.

4. Within 5 seconds, press and release the Receivers push-button switch 1

time.

5. Turn the ignition switch off then on and start the vehicle.

NOTE: If you have changed the programmed override code then substitute your new

code tenths for step 2 above, and units for step 5 above.