User's Manual

6
Remote start Quick feature programming
Enter : Press & hold “F” button until 3 beeps heard, release “ F” button LCD highlight flashing icon first,
press and release “F” button to move blinking cursor to the desired icon which you want to program.
Press
button means Enable, 2-way LCD HHU
Note:
Cursor method: a constant illumination mean the selected feature enable.
Exit : Press & hold " F " button for 2 sec. or do nothing wait for 5 sec. automatic exit
2-way LCD (1 beep) => Confirm Exit.
F Button LCD display Button
Manual gear reservation
Icon flash
Icon stay On = Enable
Icon Off = Disable.
Press and hold the F
Button until 3 beeps
sounded
Turbo Timer icon flash
Press
button Enable Turbo
mode
Icon stay On = Enable
Icon Off = Disable
Press & Release “ F”
button to move cursor
flash to Daily Start icon
Daily start icon flash
Press
button Enable Daily start
mode.
Icon On = Enable
Icon Off = Disable
Press & Release “ F”
button to move cursor
flash to TIME START
icon
Timer start icon flash
Press
button Enable Timer Start
mode.
Icon On = Enable
Icon Off = Disable
OPERATION:
A. REMOTE TRANSMITTER OPERATION:
Transmitter
Button
System Function Remark
Lock Doors & Arm System
Panic function Press and Hold for 3 seconds
Car Locator Under armed mode
-
Arm and Delete The 2 Stage Shock
Sensor
Press
twice within 3 seconds
- Arm System and Hidden Alarm
Function
Press within 3 seconds and Hold
button for 2 seconds
+
Silent Arming / Disarming Ignition in "off" position.
+
Active Anti Car-Jacking Mode
Ignition in "on" position press and hold for 2
seconds
Unlock Doors & Disarm System
-
Two Steps Door Unlock & Disarm
System
Press twice within 3 seconds.
Trunk Release (Channel 3) Press and Hold for 2 seconds
-
Passive Arming By-pass While the system Disarmed.