User's Manual

5
4 Power Save
Default is OFF
Select Power Save
Enable or Disable
+ or
Press
button = Enable or
Press
button = Disable
When power save enable, the LCD remote
transceiver uses “0” current to save the battery
power. LCD show “Save” on text area
Exit: Press any button of LCD remote to exit
the “Power Save Mode”.
Press
button confirm its selection,
move to next option.
5 2-way HHU
Response mode
or
VIBRO
Default is Buzzer
Select 2-way HHU
confirmation by
Melody or Vibration
+ or
VIBRO + or
BZ+VIB + +
Press
button = Melody or
Press
button = Vibration
Press
button confirm its selected, move to
next option.
6
Second Car
Security Option
CAR SELECT
Default is CAR 1
CAR 1
or
CAR 2 ( II icon On)
- CAR 1 operation.
- CAR 2 operation (II icon On mean 2
nd
car
operation).
7
Illumination Menu
Default is
3 SEC. or
5 SEC. or
OFF
, Basic operation with backlight
Illumination 3 SEC. or 5 SEC.;
OFF – basic operation without backlight
illumination.
8
Key Lock KEY LOCK
Default is OFF
Key lock enable or
disable
Press
button = Enable or
Press
button = Disable
9
CAR LCD* CAR LCD
Default is OFF
LCD display show car
icon or not
Press
button = Enable or
Press
button = Disable
10
(Time adjust for
Daily Start mode)
icon flashing
Default is OFF
1 -12 12 : 00
12 is flashing
, - Program Daily start hour
Press
button = (+) hours increase or
Press
button = (-) hours decrease
0 - 59 12 : 00
00 is flashing
, - Program Daily start minute
Press
button = (+)minutes increase or
Press
button = (-)minutes decrease
* Car LCD icon is programmable show car icon on LCD display always or appear it needed as below.
(system trigger / valet mode / zone ajar/ anti car-jacking mode Car LCD will show on LCD display).