User's Manual

3
Press
F Button 3rd time
(HHU 1 beep) within 5
seconds
ANTI- HIJACK and
icon On
Under ignition in "on" position Press
button Enable to activate anti car
jacking functions.
Press F Button 4th time
(HHU 1 beep) within 5
seconds
CH 4 flashing
Press button Enable CH#4
output
Note : Press and release F Button 2-way LCD Backlight turns on for 5 seconds
Table 2 :
Enter : Press & hold “ F “ button until 2 beeps heard, release F-button.
Continue press F button within 5 sec. to move forward to feature option
you want to program.
EXIT: Press & hold " F " button for 2 sec. or do nothing wait for 5 sec. automatic exit
2-way LCD (1 beep) => Confirm Exit.
F Button LCD display Button
Press and hold the F
Button until 2 beeps
sounded
MENU flashing Press button to enter 2-way
HHU menu mode
Press F Button 2
nd
time (HHU 1 beep)
within 5 seconds
STATUS CHECK Press button Enable to check
the vehicle’s status.
Press F Button 3rd
times (HHU 1 beep)
within 5 seconds
ALARM CHECK Press button Enable to check
vehicle’s trigger status.
Press F Button 4th
times (HHU 1 beep)
within 5 seconds
VOLTS CHECK Press button Enable to check
vehicle’s Voltage.
Press F Button 5th
time (HHU 1 beep)
within 5 seconds
TEMP CHECK Press button Enable to check
temp. status
Table 4 : Return 2-way HHU to default setting
Enter : Press & hold “ F “ button until 4 beeps heard, release F-button.
EXIT: Press & release " F " button or do nothing wait for 5 sec. automatic exit
2-way LCD (1 beep) => Confirm Exit.
F Button LCD display Button
Press and hold the F
Button until 4 beeps
sounded
RESET flashing Press & hold button for 2
seconds to back to default setting
and 1 chip for confirm
D. 2-way LCD HHU PROGRAMMING (Select and Adjusting Table-2-Menu options):
Enter:
1. Press and hold
F button until 2 beeps heard then release the F button.
2. The Matrix show MENU flash, press
button to enter HHU menu mode.
(LCD display show Hours of current time set up, set up hour(s) first.)
3. Press
button to increase value, or Enable the selected feature.
4. Press
button to decrease value, or Disable the selected feature .
5. Press button to confirm its selection, move to the next option.
EXIT: Press & hold " F " button or do nothing wait for 15 sec. automatic exit
2-way LCD (1 beep) => Confirm Exit.