User's Manual

2
Ignition Trigger
Ignition switch is illegally turned on
(Zone 5)
System trigger
Remote Transmission
You are transmitting the signal to
control unit
In – Range Indicator
Your are within the remote control
range.
Anti Car-Jack Mode
Activate the anti car-jacking mode
2
nd
Car Operation
Engine Cranking
Your vehicle engine Cranking by
remote control
Engine Running
Your vehicle's engine is running
Timer Control Start
Engine start automatically every 2 or
3 hours.
Daily Start
Engine start automatically at the same
time next day
PASS 1
Sensor Bypass
Sensor 1bypass under Arm mode
Turbo Timer
Turbo timer was set up
Manual Gear
Engine Start Memorizing for the car
with manual gear was set up
Activate Channel 3 (Trunk Release).
Activate Channel 3
Activate Channel 4
12:00
Time Monitor
12:00
Alarm Clock
You have set morning call alarm
0:10 P
Parking Meter
Reminder when time is up for parking
Low Battery
You have to replace the battery of
remote control.
Melody Mode
Remote Control alert user through
melody sound
Vibration Mode
Remote Control vibrates when the
system is triggered
C. 2-way LCD REMOTE CONTROL TRANSCEIVER OPERATION:
Table 1:
Enter : Press & hold “ F “ button until one beep, release F-button and continue press
F button within 5 sec. to move forward to feature option you want to program.
EXIT: Press & hold " F " button for 2 sec. or do nothing wait for 5 sec. automatic exit
2-way LCD (1 beep) => Confirm Exit.
F Button LCD Display Button
Press and hold the F
Button until 1 beeps
sound
SENSOR BYPASS and
PASS 1 icon On
Press button Enable to arm the
alarm and bypass sensor 1.
Press F Button 2nd time
(HHU 1 beep) within 5
seconds
HIDDEN ALARM and
icon On
Press
button Enable to arm
system and with Hidden Alarm
Function.