User's Manual

10
P. DRIVER PAGING / LOSE & FOUND (For two-way transceiver operation only)
It is useful the event that someone wants to page the driver of the parked vehicle or someone cannot find
his LCD remote transceiver.
Under the ignition switch “off” condition, press and hold the valet switch for 3 seconds to page the driver,
one chirp sound shall be emitted from the vehicle and the paging melody sound continues sounding from
you Remote LCD transceiver.
Q. DOME LIGHT CONVENIENCE SUPERVISION (Optional Feature)
The alarm has a unique feature that will turn on your vehicle dome light as follows:
1. Upon disarming, the interior light will remain on for 30 seconds.
2. If the vehicle is intruded, the interior light will flash for the same duration as the siren.
Note: Turning on the ignition switch or arming the alarm will turn off the dome light.
R. IGNITION CONTROL DOOR LOCK/UNLOCK. (Programmable Feature)
If the vehicles door locks have been interfaced to the security system, the system will automatically lock the vehicle's
doors when the ignition is turned “ON” and /or unlock the vehicle’s doors when the ignition is turned “OFF”.
(Default is “OFF”)
S. TRUNK RELEASE (CHANNEL 3) OUTPUT.
Press and hold button on the transmitter for two seconds to remote control the trunk release or other
electric devices.
T. CHANNEL 4 TIMER CONTROL OUTPUT
By Table – 1, Press and hold
F button of LCD remote until 1 beep sound , release and re-press F button
3 more times the LCD display show “CH 4“ on text field (see Table 1) then press
button to activate
channel 4 function. Or press remote
transmitter and buttons at the same time to active Channel 4 function.
Channel 4 is user-programmable timer output. You may program the built-in timer to send a ground signal for any time
duration from 1 second to 120 seconds. For instance, this timer output may be used to turn on the headlight, power
window or sunroof. (Factory defaults setting at 1 sec. pulse output.)
U. POWER SAVER MODE (Default OFF)
By table - 2 -1– 4 under Menu mode while “POWER SAVE” icon flash press button, LCD HHU show
“Save” unit under power save mode, the LCD remote transceiver use “0” current to save the battery power, LCD
indicate “SAVE “.
Exit: Press any button of the LCD remote transmitter to exit “Power Save Mode”.
V. POWER ON MEMONRY:
This security system is equipped with circuitry that will allow the unit to remember its alarm state if the
power is lost and then reconnected.
W. SECOND VEHICLE SECURITY OPERATION:
Your 1-way remote transmitter can be utilized to control a second vehicle security system, To program the remote
control transmitter to a second vehicle, follow the instructions
* For 1-way transmitter press button
+ for 2 seconds until transmitter LED (flash 2 times ) as a shift button.
1. Once shift button (
+ ) is pressed the LED flash 2 times to indicate the second transmitter pin code has
built-in.
2. Press any button on the remote control transmitter to control a second vehicle security system LED on Transmitter
will flash 2 times indicate it’s 2
nd
car operation no matter which button is pressed.
** For LCD transceiver – 2
nd
car operation:
a. By table-2-1-6 Press and hold F button until 2 beeps heard, release F button
b.
flash on the text field of LCD screen, press button to enter the menu mode.
c. Press & release button to move down the menu to #6, CAR SELECT
d. Select CAR 1 or CAR 2 by pressing
or button (text field show CAR 1 or CAR 2).
X. CHECK VEHICLE’S VOLTAGE:
Press and hold
F button of LCD remote until 2 beeps sound , release and re-press F button for three times,
the LCD remote will show “VOLTS CHECK“ icon flash on text area (see Table 2), then press
button to
activate system Voltage check. Please note that this data is for your reference only. Please check the
exact data on vehicle.
REMOTE START OPERATION:
A. TO REMOTE START THE VEHICLE:
When you want to start your vehicle,
1. Press
button once on the transmitter.
2. The parking light will activate to indicate the remote start received the signal.
3. The engine will start in approximately 5 seconds.