User's Manual

3
Lost or Forgotten Keypad Pin Codes
Resetting a Keypad with an Unknown Pin Code
The following procedure will take you through the process of resetting a PIN on a Keypad if the current PIN is unknown.
1. Login to the LMS website & locate the Keypad in question.
2. Deselect the “PIN REQUIRED” check box for that Keypad.
3. Select “SAVE”.
Note: If the Keypad has already been authenticated for the day with the unknown PIN, you must wait until the keypad operating time has
expired for the day before carrying out these next steps:
1. Authenticate the Keypad.
2. Press and hold the “*” button on the Keypad for 10 seconds until the light flashes green 4 times.
3. Enter in the new 4 digit PIN within 10 seconds, the light will flash back green 3 times.
4. Re-enter the new PIN again to confirm your entry, the light will flash back green 4 times.
5. Press and hold the “0” button on the Keypad for 10 seconds until the light flashes green 3 times.
6. Login to the LMS and locate the Keypad in question again.
7. Select the “PIN REQUIRED” check box for that Keypad.
8. Select “SAVE”.
9. Re-Authenticate the Keypad, it should now be operating with the new PIN number.
Master Keypad
A Master Keypad does has 24 access to vehicles without the need of authentication from the ACM. This is intended to be placed in a
secured location such as a safe to be used in case of an outage. A master keypad will only work with the dealer it is registered with in
the LMS website.