User's Manual

Transitioning into Factory Keyless Upgrade Mode - Blue

1. Open a vehicle door.

2. Enter the vehicle number into an ACM keypad.

3. Press the UNLOCK button.

4. Press and release the TRANS button.

5. Press and release the “BLUE” button.

6. The LED will flash blue 1 time and the system will chirp 3 times.

7. Close the vehicle’s door..

Note: The ACM keypad must be authorized for transitioning.

Note: Factory Keyless Upgrade Mode enables all of the device’s security functionality by use of the factory transmitters.

Transitioning into Security with Transmitters Mode - Red

1. Open a vehicle door.

2. Enter the vehicle number into an ACM keypad.

3. Press the UNLOCK button.

4. Press and release the TRANS button.

5. Press and release the “RED” button.

6. The LED will flash red 1 time and the system will chirp 3 times.

7. Within 5 seconds, program the aftermarket transmitter by pressing the lock button of each transmitter you wish to program.

8. Close the vehicle’s door..

Note: The ACM keypad must be authorized for transitioning.

Note: If no remotes are programmed during step 7, the system will automatically transition into the Factory Keyless Upgrade Mode -

BLUE

Note: Security with Transmitters Mode enables all of the device’s security functionality by use of aftermarket transmitters.

Transitioning into Lot Mode

1. Turn the ignition ON.

2. Press and release the override button 3 times.

3. The system will chirp 1 time.

4. Press button 1 of the short range transmitter.

5. The system will respond with 1 chirp.

6. Turn the ignition OFF to exit transmitter programming.

7. The system will chirp 2 times to confirm exit.

Note: This system has 1 button programming which programs all channels of the transmitter to the system at once. When in lot

mode, a consumer remote can not be programmed to the system until it is transitioned to consumer mode.

All programming features will be defaulted to the factory default settings.