User's Manual

4 ca4552. 2011 Audiovox Electronics Corporation. All rights reserved.
Transmitter Button Functions
1 Button Transmitter Start / Aux Operation Method
Unlock X
Press and Hold - During
remote start only
Remote Start X
Press and Release (1 or 2
times depending on
selectable option)
Remote Start Shut Down
X
Press and Release (1 or 2
times depending on
selectable option)
Valet Mode
Valet Mode is used to disable the system from remote starting. To
enter or exit valet mode simply follow the 4 steps outlined below:
1. Turn the vehicle’s ignition ON.
2. Push and hold the programming/valet button.
3. The LED will turn on solid when valet mode is active
4. Release the programming/valet button.
2 Way Transmitter Notifications
FUNCTION BEEPS / LED FLASHES
Activation 1 Beep / Flash
Confirm Remote Start 4 Beeps / Flashes (repeats 3 times)
Remote Start Running 1 Flash per 3 seconds for duration run time
Remote Start Shutdown 1 Long Beep / Long Flash (repeats 3 times)
Low Battery 3 Beeps / Flashes when button is pressed