User's Manual

until 2 beeps sounded
Press three times
within 5 seconds
CH 3 flashing
Press
button to activate channel
4 functions.
Press four times within
5 seconds
CH 4 flashing Press button to activate channel
5 function
Table 3: three beeps to confirm
F Button LCD display Button
Press and hold the F
Button for 3 second
until 3 beeps sounded
STATUS and
icon flashing
Press
button to check the
vehicle’s status.
Press two times within
5 seconds
ALARM and
Press
button to check the
vehicle’s trigger status.
Press three times
within 5 seconds
VOLTAGE and
icon flashing
Press button to check the
vehicle’s Voltage.
Press four times within
5 seconds
TEMP and
icon flashing
Press
button to check the
outside temp. status
Press five within 5
seconds
Start timer and
icon flashing
Press
button to activate or
cancel daily start.
Table 4: four beeps to confirm
F Button LCD display Button
Press and hold the F
Button for 4 second
until 4 beeps sounded
DEMO mode Backlight ON until DEMO operation
end.
Table 5: Do-Re-Mi sounds to confirm
F Button LCD display Button
Press and hold the F
Button for 6 second
until Do-Re-Mi
sounded
DEFLT flashing Press & hold button for 2
seconds to back to default setting
and 1 chip for confirm
D. PROGRAMMING LCD REMOTE:
Selecting and Adjusting Menu options:
 Press and hold
F button for 1 second until 2 beeps sound, then release the F button.
 The text
will flash on the LCD screen, press button to enter the menu.
 Press
button to move up in the menu or button to move down in the menu.
 Press
button to select the option you would like to adjust.
 Press
button to increase the value, to activate or deactivate a function or to toggle through
the selection.
 Press
button to decrease the value, to activate or deactivate a function or to toggle
through the selection.
 Press
button to move to the next sub-option or go back to the main menu.
EXIT: Press
button to exit the menu mode.
Order Menu Option LCD display Functions
1 Parking Menu PARK METER Default is
- Parking hours 0:30
0 is flashing
, - Adjusts parking hour
(value from 0 to 2).
- Parking
minutes
0:30
30 is flashing
, - Adjusts parking minute
(value from 0 to 59).
3