User's Manual

ManualsBrandsAdvance Security ManualsAutomotiveCar Alarm Transceiver

PROFESSIONAL 2-WAY AM/AM REMOTE CAR STARTER

KEYLESS ENTRY SYSTEM

With Two-way Serial Port Data Link

OPERATION MANUAL

SYSTEM OPERATIONS:

WARNINGS:

As with any product that performs automatic functions, there are certain safety precautions that you must practice and

be aware of.

1. Keep the transmitter out of children’s reach.

2. Do not leave anyone in the vehicle while the vehicle is running on remote control.

3. Alert servicing personnel that the vehicle can be started automatically.

4. Do not start the vehicle by remote while it’s in an enclosed area or garage.

5. Always apply the parking brake and lock the vehicle as you exit the vehicle.

6. The vehicle windows must be rolled up.

7. Should the unit malfunction, disconnect the fuse until the problem is corrected.

8. The use and operations of this system is the sole responsibility of the operator.

9. Some areas may have local ordinances that prohibit leaving a vehicle running on public streets.

10.It is not safe to remote start the vehicle if the vehicle is parked on a steep incline.

Transmitter

Button

System Function Remark

Lock Doors All doors lock

Panic function

Press and Hold for 3 seconds.

Press to stop panic.

Silent Lock / Unlock Ignition in "off" position.

Unlock Doors

Two Step Door Unlock (Driver’s door on the first push;

Passenger’s door on the second push ( optional )

Press twice within 3 seconds.

Car Locator Push while the system is armed

Trunk Release Press and Hold for 2 seconds

Activate or Turn Off The Remote Start

Push once or twice depending on system settings

(Program)

Switching Code For 2nd Car Operation. Standard

Remote only

Push Before Command

ACTIVE LOCK:

1. Press button on the transmitter.

2. The Siren will chirp once and parking lights will flash once indicating that the system is now active. The

vehicle doors will lock upon activating only when interfaced with the keyless entry system.

SILENT LOCKING / UNLOCKING: Pressing the + buttons

together on the transmitter will lock or unlock your system, No chirp sound will be heard. Lock / unlock

confirmation will be seen through the vehicle’s parking lights only.

ACTIVE UNLOCK:

1. Press button on the transmitter.

2. The horn will chirp twice and parking light will flash twice to indicating that the keyless system is now

unlocked. The vehicle doors will unlock and dome lights will turn on for 30 seconds.

PATHWAY ILLUMINATION

Summary of content (7 pages)

PAGE 1
PROFESSIONAL 2-WAY AM/AM REMOTE CAR STARTER & KEYLESS ENTRY SYSTEM With Two-way Serial Port Data Link OPERATION MANUAL SYSTEM OPERATIONS: WARNINGS: As with any product that performs automatic functions, there are certain safety precautions that you must practice and be aware of. 1. Keep the transmitter out of children’s reach. 2. Do not leave anyone in the vehicle while the vehicle is running on remote control. 3. Alert servicing personnel that the vehicle can be started automatically. 4.
PAGE 2
This feature turns the parking light “ON” for 30 seconds upon a unlock signal and for 10 seconds upon the lock signal. (Programmable) TWO STEPS DOOR UNLOCK: This feature will independently unlock the driver door only when deactivating the system. Pushing the button a second time within 3 seconds will unlock the entire vehicle.
PAGE 3
Upon unlocking, the interior lights will remain on for 30 seconds. Note: Turning on the ignition switch or activating the system will turn off the dome light. IGNITION CONTROL DOOR LOCKS If the vehicle’s door locks have been interfaced to the security system, the system will automatically lock the vehicle’s doors when the ignition is turned “ON” and /or unlock the vehicle’s doors when the ignition is turned “OFF”.
PAGE 4
TEMPORARY STOP FEATURE: This feature allows the vehicle to remain running after the key has been removed from the ignition. This feature is useful for occasions when you wish to exit and lock the vehicle for short periods of time, but would like to leave the engine running and the climate control on. 1. Before turning off the engine, press the button once on the transmitter. The parking lights will come on and the LED will flash 3 times to confirm Temporary Stop feature ‘ON’ 2.
PAGE 5
Note: If the system is interfered by stronger radio frequency around, sources of high voltage electric power or such obstacles like tall buildings and so on, the transmission range may get shorter as the system uses low output powered frequency. BATTERY REPLACEMENT: A 1.5V type AAA Alkaline battery powers the Remote Transmitter. When the power of the battery weakens a icon shall be displayed on the LCD screen.
PAGE 6
Program Mode Program Mode Program Mode - + Switching code for 2nd / 1st Car Operation Melody / Vibration Mode Press within 5 seconds Press within 5 seconds Power Save Mode LCD screen lamp turns on for 5 seconds. Clear the Flash Icon and Melody Sound Press within 5 seconds Press within 3 seconds 1. Second Vehicle Security Operation: Your remote transmitter can be utilized to control a second vehicle’s Auto Page security system.
PAGE 7
1. Press and hold all four remote control buttons simultaneously unit one long beep is heard. Programming has now been entered. 2. Within 5 seconds, press the button to toggle “On” or “Off”. The remote will beep once for “On”, twice for “Off”. When power save mode is “On”, the icon on the LCD screens to indicate entry the “power save mode” 3. To exit programming mode, take no action for five seconds. The remote control will generate two long beeps to indicate programming mode has been exited.