User's Manual

OVERRIDE THE SYSTEM TO TURN OFF ANTI CAR- JACKING:
Turn the ignition switch from OFF to ON, and within 10 seconds push valet switch, the siren will stop and
the system disarmed
O. SYSTEM’S TRIGGER CHECK (For two-way transceiver operation only)
Press the transceiver button first, within 3 seconds press (C) button. It
responds with one melody sound and all trigger’s records will immediately displayed on
the LCD screen.
Note: If it has no responds then you are out of range.
P. SYSTEM’S STATUS CHECK (For two-way transceiver operation only)
When you want to check the system’s present status through the LCD screen, Press the
transceiver
button twice, within 3 seconds press (C) button. It responds with
one melody sound and all vehicles’ status records will immediately displayed on the
LCD screen.
Note: If it has no responds then you are out of range.
Q. DRIVER PAGING / LOSE & FOUND (For two-way transceiver operation only)
It is useful the event that someone wants to page the driver of the parked vehicle or someone cannot find
his LCD remote transceiver.
Indoor Driving Paging
Under the ignition switch “off” condition, press and hold the valet switch for 2 seconds to page the driver,
one chirp sound shall be emitted from the vehicle and the paging melody sound continues sounding from
you Remote LCD transceiver and “
” indication flashes on the LCD screen.
Outdoor Driving Paging
If someone tries to page you by tapping the paging (knock) sensor (optional) which is usually mounted on
the bottom part of front window, the paging melody sound continues sounding from you Remote LCD
transceiver and “
” indication flashes on the LCD screen.
1. Press the transceiver
button first, within 3 seconds press ( ) button to
activate outdoor driver paging function, It responds with chirps of the vehicle, a
melody sound and "
" indication flashes on the LCD screen to confirm the function
is on.
2. When tapping the paging (knock) sensor, one chirp sound shall be emitted from the
vehicle and the paging melody sound continues sounding from you Remote LCD
transceiver and “
” indication flashes on the LCD screen.
3. Turn on the ignition switch; OR press the
button to arm the system; OR press the button to
disarm the system, this outdoor driver paging function will exit.
R. DOME LIGHT CONVENIENCE DELAY & SUPERVISION
The alarm with a unique feature which will turn on your vehicle dome light as following:
1. Upon disarming, the interior light will remain on for 30 seconds.
2. If the vehicle is intruded, the interior light will flash for the same duration as the siren.
Note: Turn on the ignition switch or arm the alarm will turn off the dome light.
S. IGNITION CONTROL DOOR LOCK/UNLOCK.
If the vehicles door locks have been interfaced to the security system, the system will automatically lock
the vehicle's doors when the ignition is turned “ON” and /or unlock the vehicle’s doors when the ignition is
turned “OFF”.
T. TRUNK RELEASE (CHANNEL 3) OUTPUT.
Press and hold button on the transmitter for one seconds to remote control the trunk
release or other electric devices.
U. CHANNEL 4 /5 /6 /7 TIMER CONTROL OUTPUT
Activate The Channel 4: Press and buttons at the same time to active Channel 4 function.
Activate The Channel 5: Press
and buttons at the same time to active Channel 5 function.
Activate The Channel 6: Press
and buttons at the same time to active Channel 6 function.
Activate The Channel 7: Press and buttons at the same time to active Channel 7 function.
The channel output is user-programmable timer output. This timer output may be used to turn on the
headlight, power window or sunroof. (Factory defaults setting at momentary output.)
7