User's Manual

1
H1/6 Pink Wire =
Ignition 2 on during
Crank
H1/6 Pink Wire =
Ignition 2 off during
Crank
H1/6 Pink Wire =
Ignition 2 same as
accessory
2
H11/5 Brown Wire =
Constant Siren
output
H11/5 Brown Wire =
5-second pulse
Siren output
H10/5 Brown Wire =
Horn Output
3
H3/9 White / Blue
Wire =
1 pulse activate
H3/9 White / Blue
Wire =
2 pulse activate
4
H4/4 White / Yellow
Wire Disarm Signal
Output = One Pulse
Output
H4/4 White / Yellow
Wire Disarm Signal
Output = Same as
Door Unlock Output
5
+
H3/13 Yellow Wire =
Ignition 3 on during
Crank
H3/13 Yellow Wire =
Ignition 3 off during
Crank
H3/13 Yellow Wire =
same as accessory
6
+
H3/17 Black / Green
Wire Channel 4
Output =
1 pulse output
H3/17 Black / Green
Wire Channel 4
Output =
Latched output until
IGN ON
H3/17 Black / Green
Wire Channel 4
Output =
As long as TX
button is held
H3/17 Black / Green
Wire Channel 4
Output =
Output for 15-sec.
FIVE Chirps= Output for 30 sec.
7
+
H3/18 Black / Red
Wire Channel 5
Output =
1 pulse output
H3/18 Black / Red
Wire Channel 5
Output =
Latched output until
IGN ON
H3/18 Black / Red
Wire Channel 5
Output =
As long as TX
button is held
H3/18 Black / Red
Wire Channel 5
Output =
Output for 15-sec
FIVE Chirps= Output for 30 sec.
H3/19 Black / Violet
Wire Channel 6
Output =
1 pulse output
H3/19 Black / Violet
Wire Channel 6
Output =
Latched output until
IGN ON
H3/19 Black / Violet
Wire Channel 6
Output =
As long as TX
button is held
H3/19 Black / Violet
Wire Channel 6
Output =
Output for 15-sec
8
+
FIVE Chirps= Output for 30 sec.
*9
+
H3/20 Black /
Yellow Wire
Channel 7
Output =
1 pulse output
H3/20 Black /
Yellow Wire
Channel 7
Output =
Latched output until
IGN ON
H3/20 Black /
Yellow Wire
Channel 7
Output =
As long as TX
button is held
H3/20 Black / Yellow
Wire Channel 7
Output =
Output for 15-sec
FIVE Chirps= Output for 30 sec.
Exit: Turn Ignition to 'ON' position, or leave it for 15 seconds to exit the program mode and the siren will
chirp three long chirps.
REMOTE START FEATURE PROGRAM MODE.
START FEATURE “I” PRORAMMING:
1. Turn the Ignition switch ‘ON/OFF’ 3 TIMES and stay in OFF position.
2. Push the Valet switch 8 times and holding in on the 8
th
push until four chirps with a long chirp is hearing
then release the valet switch. You are now in the Start feature ‘I’ programming mode.
3. Press and release the transmitter button ‘A’ corresponding to the feature ‘A’ you want to program.
Press
T
ransmitte
r
Button
One Chirp /
LED one pulse
Factory Default
Setting
Two Chirps /
LED two pulse
Three Chirps /
LED three pulse
Four Chirps /
LED four pulse
1
+
Gasoline Engine
16