User's Manual

1. Press
first, within 3 seconds press and hold and buttons at the same time
for 2 seconds with one long beeping sound and the “
” timer icon will display on
the LCD screen to indicate the system is back to first transceiver pin code.
2. While the “
” timer icon display on the LCD screen, you can remote control
and communicate with a first vehicle security system. It has one short “bi” sound
while pressing the button of the LCD screen transceiver.
D. TIMER SETTING:
Transceiver Button Description Press Transceiver Button
1 Press & Hold the
button for 3 seconds
Timer Setting (Hour)
*Flash digit for adjusting
for – and for +
Press the button once Time setting (Minute)
*Flash digit for adjusting
for – and for +
2 Press the button once.
Alert Alarm Time Setting (Hour)
*Flash digit for adjusting
for – and for +
Press the button once Alert Alarm Time Setting (Minute)
*Flash digit for adjusting
for – and for +
Press the button once Alert Alarm Setting ON / OFF for OFF and for ON
3 Press the button once
Count Down Timer Setting (Hour)
*Flash digit for adjusting
(Max.19 hours 59 minutes)
for – and for +
Press the button once Count down Timer Setting (Minute)
*Flash digit for adjusting
for – and for +
Press the button once Count down Timer Setting ON / OFF for OFF and for ON
4
Press & hold the
button
for 2 seconds.
Daily Timer Start Timer Setting
Flash
/ icon and “Hours” for
adjusting
for – and for +
EXIT: Press and hold the button for 2 seconds or leave it for 10seconds, the system will exit the
programming mode.
1. Timer Setting: Example to AM10:30
1. Press & hold the
button for 3 seconds, with two-melody sound and the “Hours” digit flashes for
adjusting.
2. Press the
or button to decrease or increase the “Hour” digit until AM10:xx
3. Press the button once again then the “Minute” digit flashes for adjusting.
4. Press the
or button to decrease or increase the “Minutes” digit until AM 10:30
5. Press the button for 2 seconds with one-melody sound to confirm exit the timer program mode.
2. Alert Alarm Timer Setting: Example to PM 6:30
1. Press & hold the
button for 3 seconds, with two-melody sound and the “Hours” digit flashes for
adjusting.
2. Press the
button twice, the LCD screen will shows icon and “Hours” digit is flashes for
adjusting.
3. Press the
or button to decrease or increase the “Hour” digit until PM 6:xx
4. Press the button once again then the “Minutes” digit flashes for adjusting.
5. Press the
or button to decrease or increase the “Minutes” digit until PM 6:30
6. Press the
button once again then icon flashes for alert alarm “ON / OFF” setting
7. Press the
button to start the “Alert Alarm Timer”, and the “ON” icon will show on the LCD screen.
Press the button to stop the “Alert Alarm Timer”, and the “OFF” icon will show on the LCD screen.
8. Press button for 2 seconds with one-melody sound to confirm exit the timer program mode.
3. Count Down Timer Setting: Example Set count down timer at 2:30
1. Press & hold the
button for 3 seconds, with two-melody sound and the “Hours” digit flashes for
adjusting.
2. Press the
button 5 times, the LCD screen will shows icon and “Hours” digit is flashes for
adjusting.
3.Press the
or button to decrease or increase the “Hour” digit until 2:xx
4.Press the button once again then the “Minutes” digit flashes for adjusting.
5. Press the
or button to decrease or increase the “Minute” digit until 2:30
6. Press the
button once again then icon flashes for alert alarm “ON / OFF” setting
7. Press the button to start the count down timer, and the “ON” icon will show on the LCD screen.
Press the button to stop the count down timer, and the “OFF” icon will show on the LCD screen.
8. Press the button for 2 seconds with one-melody sound to confirm exit the timer program mode.
13