User's Manual

10
Press the
button
once
Count down Timer Setting
ON / OFF
for OFF and
for ON
4
Press & hold the
button for 2 seconds.
Daily Timer Start Timer
Setting Flash
/
icon and “Hours” for
adjusting
for – and for
+
EXIT: Press and hold the button for 2 seconds or leave it for 10seconds,
the system will exit the
programming mode.
1. Clock Setting: Example to AM10:30
1. Press & hold the
button for 3 seconds, with two-melody sound and
the “Hours” digit flashes for adjusting.
2. Press the
or button to decrease or increase the “Hour” digit until
AM10:xx
3. Press the
button once again then the “Minute” digit flashes for
adjusting.
4. Press the or button to decrease or increase the “Minutes” digit
until AM 10:30
5. Press the
button for 2 seconds with one-melody sound to confirm
exit the timer program mode.
2. Alert Alarm Timer Setting: Example to PM 6:30
1. Press & hold the
button for 3 seconds, with two-melody sound and the
“Hours” digit flashes for adjusting.
2. Press the
button twice, the LCD screen will shows icon and “Hours”
digit is flashing for adjustment.
3. Press the
or button to decrease or increase the “Hour” digit until
PM 6:xx
4. Press the
button once again then the “Minutes” digit flashes for
adjusting.
5. Press the or button to decrease or increase the “Minutes” digit until
PM 6:30
6. Press the
button once again then icon flashes for alert alarm “ON /
OFF” setting
7. Press the button to start the “Alert Alarm Timer”, and the “ON” icon will
show on the LCD screen. Press the button to stop the “Alert Alarm Timer”,
and the “OFF” icon will show on the LCD screen.
8. Press
button for 2 seconds with one-melody sound to confirm exit the
timer program mode.