User's Manual
Table Of Contents
- BLACK 4-PIN CONNECTOR. – TWO-WAY TRANSCEIVER/ANTE
- The Two-way transceiver/antenna mounts on the location above the belt line (dashboard) of the vehicle for best reception. We suggest you mount it on the lower left or upper left-hand side of windshield.
- - Remove the protective tape backing.
- - Carefully align the two-way transceiver/antenna and apply to windshield.
- METHOD 1
- METHOD 2
MAY/18/2005
2 PIN BLUE CONNECTOR FOR THE PROGRAM SWITCH:
Select a mounting location for the switch that is easily accessible to the driver of the vehicle. The switch
does not have to be concealed. however, concealing the switch is always recommended. Route the
program switch wires to the control module.
6 PIN DOOR LOCK CONNECTOR:
Blue/White
Wire:
(30
) - Door Unlock Relay
Blue/Red
Wire:
(87a)
- Door Unlock Relay
Blue/Yellow
Wire:
(87)
- Door Unlock Relay
Green/Red
Wire:
(87a)
- Door Lock Relay
Green/White
Wire:
(30
) - Door Lock Relay
Green/Yellow
Wire:
(87)
- Door Lock Relay
INSTALL NEW DOOR LOCK MOTORS
+12V
Green/ white
Blue/ white
Blue/ red
Green/ red
Green/ yellow
Blue/ yellow
N
EGATIVE TRIGGER DOOR LOCK SYSTEM
Blue / white
Green / white
Door Lock
Maste
r
Lockin g
Switch
Door unlock
Green / y ellow
Blue / y ellow
POSITIVE TRIGGER DOOR LOCK SYSTEM
Blue / white
Green / white
Door Lock
Master
Lockin g
Switch
Door unloc
k
Green /
y
ellow
Blue / yellow
+ 12V
+ 12V
ALTERNATING DOOR LOCKS
+12V
Master Door
Lock Switch
X
X
Splic
Splic
Cut the
Existing
Lock Wire
To Door
Lock
To Slave Door
Lock switches
Green/ white
Green/ red
Cut the Existing
Unlock Wire
Blue/ white
Blue/ red
+ 12V
Green/ yellow
Blue/ yellow
VACUUM OPREATE DOOR LOCKING SYSTEM
Green/ white
Blue/ red
Green/ red
Blue/ white
Blue/ yellow
Green/ yellow
+12V
X
Cut
Compressor
Door Switch
DELUXE 200-LCD
8