User's Manual

PROGRAMMABLE OPTION RESET
This system provides a reset method to restore all options to FACTORY DEFAULT
VALUES as listed in the “Button #2” column of the programmable option chart on
pages 18-19. This can be helpful if you have lost track of the option settings on
your system, or when you are moving the system from car to car and want a “clean
slate”.
1. Open hood (ground the Blue Hood Switch Wire if no hood pin is installed)
2. Turn Key to the ON position
3. Press program / valet button 5 times, after a few seconds the unit will flash the
lights 5 times.
4. Push the valet/program button 25 times. Press carefully, do not lose count! You
must get a light flash each time you press the button. If the unit didn’t flash the
lights, then the system did not register your press.
PROGRAMMABLE OPTION TABLE
Option
#
CS-2205 Alarm
Function
TX Button #1 TX Button #2 TX Button #3 TX Button #4
1 Horn Pulse
Door & Hood
Trigger Only
*All Functions
No Warn-A-
Way
No Arm/Disarm
Pulse
2
Auto lock with
Ignition
OFF
*ON =
Lock/Unlock
Lock Only Unlock Only
3
Passive/Active
Arming
ON = Passive Arm *OFF = Active Arm
4 Active Re-Arm ON *OFF
5 Passive Locks ON *OFF
6
Parking Lights
on w/Disarm
OFF *ON
7
Arm with
Ignition ON
OFF
*ON (Sensors off
with Ignition On)
ON
(Sensors on
with Ignition
ON)