User's Manual

APR/30/2003
RST771A OP
14
to prevent from any inadvertent pressing of buttons by others. Press the
button
first, within 3 seconds press and hold the
( ) button for 2 seconds to activate or
cancel the button lock function, the
icon will displayed on the LCD screen to
show the LCD remote transmitter is on “Button Lock”.
6. Vibration / Melody Mode:
It is useful when you are in a noisy place and difficult to hear beep sound from the
remote control as the remote control in this mode, vibrates itself if your security
system is triggered.
Press the
button first, within 3 seconds press and hold the ( ) button
for 2 seconds to select the mode of vibration or melody, the
icon will displayed
on the LCD screen to show the LCD remote transmitter is on vibration mode.
7. Enable / Disable Bi Sound While Pressing Button:
It has a short “bi” sound while pressing the button of the LCD screen transmitter
If you want mute the “bi” sound mute always while press button. Press the
button first, within 3
seconds press and hold the
(Bi) button for 2 seconds to disable the “bi” sound.
8. Low Battery Indication:
When the power of the battery weakens, it has two short “bi” sound and flash
icon while pressing
the button of the LCD screen transmitter.
9. Set Up Fixed Count Down Timer:
1. Press the button first, within 3 seconds press and hold the ( ) button for 2 seconds, the
LCD screen will shows
icon and timer (ie. 0:10) ,
2. Press the
( ) button again showing next order time on the screen ( ie.0:20), press them again
(ie.0:30)…..and so on.
3. Leave the buttons starting count down then
icon flashes
Note: 1.The count down period is fixed as 10 minutes, 20 minutes, 30 minutes, 1 hour, 1.5 hours and 2
hours maximum.
2.When count down timer showing 0:00 means to turn off the timer.
3. Press
button for real time indication when the timer is counting down.
10. Out Of Range Indication:
1. If within the range, the
icon will display on the LCD screen.
2. If you are out of range, the
icon will disappear on the LCD screen.
D. TIMER SETTING:
Transmitter Button Description Press Transmitter Button
1
Press & Hold the
button for 3 seconds
Timer Setting (Hour)
*Flash digit for adjusting
for – and for +
Press the
button once
Time setting (Minute)
*Flash digit for adjusting
for – and for +
2
Press the
button
once.
Alert Alarm Time Setting (Hour)
*Flash digit for adjusting
for – and for +
Press the
button once
Alert Alarm Time Setting (Minute)
*Flash digit for adjusting
for – and for +
Press the
button once
Alert Alarm Setting ON / OFF
for OFF and for
ON
3
Press the
button once
Count Down Timer Setting (Hour)
*Flash digit for adjusting
(Max.19 hours 59 minutes)
for – and for +
Press the
button once
Count down Timer Setting (Minute)
*Flash digit for adjusting
for – and for +
Press the
button once
Count down Timer Setting ON / OFF
for OFF and for
ON
4
Press & hold the
button
for 2 seconds.
Daily Timer Start Timer Setting
Flash / icon and
“
Hours
”
for
– and
for +