User's Manual

APR. 25, 2003
ALA761 IN
14
RETURN TO FACTORY DEFAULT SETTING
1. Turn the ignition ON then OFF 3 TIMES and stay in OFF position.
2. Push the Valet switch 12 times and hold it until six chirp with a long chirp is hearing then release the valet
switch. You are now in the “Return To Factory Default Setting” programming mode.
3. Press and hold the
and
button at the same time on the transmitter for 6 seconds, there will be a
confirmation six chirp with 3 long chirp & 3 parking light flashes to confirm the system “Alarm Feature
Programming “ all returns to factory default setting then exit.
Exit
: Turn Ignition to 'ON' position, or leave it for 15 seconds. A 3 long chirps & 3 parking light flashes to
confirm exit.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received: including interference that may cause undesired 
operation.
Note: The manufacturer is not responsible for any radio of TV interference caused by unauthorized 
modification to this equipment. Such modification could void the user’ authority to operate the equipment.