User's Manual

OCT.09, 2002

RST871A

#H5. 9 PIN BLACK CONNECTOR FOR INPUT CONNECTION:

6. Green Wire: Zone 3 / Negative Door Pin Trigger Input:

4. Blue Wire: Zone 2 / Instant Trigger Ground

7. Violet Wire: Zone 3 / Positive Door Pin Trigger

2. White / Violet Wire: (+) Positive Safety Shut Down Input for Brake switch.

3. Black/White Wire: (-) Neutral Safety Switch Input &

(-) Remote Start Toggle Switch Input

9. White / Red Wire: Tachometer Signal Input

+12V

1. White / Black Wire: (

) Negative Safety Shut Down Input for Hood pin switch

IMPORTANT NOTE: Directly connect the H5/3 BLACK/WHITE wire to the “GROUND” when this wire

is not used.

+12V

5. White / Green Wire: (-) Diesel Wait-To-Start Input

8. White / Blue Wire: (-) Instant Start and Turn Off Input

#H8. 10 PIN WHITE CONNECTOR FOR OUTPUT CONNECTION

4. White Wire: (-) 200mA Dome Light Control Output

7. Gray Wire: (-) 200mA Channel 3 (Trunk) Output

10. Orange Wire: (-) 500mA Grounded Output When Armed

1. Yellow Wire: (-) 200mA Ignition 3 Control Output

8. Pink Wire: (-) 200mA Programmable Output

1. 2 Steps Door Unlock Output (Factory Default Setting) or

2. Factory Security Disarm Signal Output or

3. Start Status (Shock Sensor By-Pass Control) Output

3. Brown / White Wire: (-) 200mA Programmable Output

1. Horn Output (Factory Default Setting) or

2. Factory Security Rearm Signal Output

6. Black / Gree n Wire: (-) 200mA Programmable Output

1. Channel 4 Programmable Output (Factory Default Setting) or

2. . Key Sensor By-Pass Output

2. Black / Violet Wire: (-)200mA Channel 6 Programmable Output

5. Black / Red Wire: (

) 200mA Channel 5 Programmable Output

9. Orange / White Wire: (-)200mA Grounded Output When Disarmed