User's Manual

Transmitter Programming

If the need arises for programming of additional or replacement

transmitters, please refer to the transmitter programming section of the

install manual.

Operating the 2 / 3 Hour Start Up Timer Mode

The system has the ability to start the vehicle every 2 or 3 hours with a

MAXIMUM of 6 start cycles. This feature is especially useful in cold

climates where the only means to keep the engine and engine fluids

warm is to periodically start the engine. The default setting is 3 hour,

Selection between 2 or 3 hour is made in option programming.

WARNING!

Be certain that the vehicle is outdoors before using this or any remote

starting device. A running engine produces dangerous carbon monoxide

fumes which can be harmful or fatal if prolonged exposure occurs. DO

NOT remote start the vehicle if it is garaged.

To begin the 2 / 3 hour start up timer mode:

1. Turn the vehicle’s ignition ON then OFF.

2. Press and hold the valet button.

3. Press the

button 4 times, the system will chirp 2 times.

4. Release the valet button.

To exit the 2 / 3 hour start up timer mode:

1. Turn the vehicle’s Ignition ON.

1. Activate the remote vehicle start feature using the remote

control.