User's Manual

times within 3 seconds will clear the

flash icon and melody sound on the LCD screen transmitter

4. Stop The Trigger Melody Sound: While triggering the alarm the LCD

screen will alert user through melody sound and flashing trigger icon, press

any button on the LCD remote transmitter to stop melody sound only.

5. Button Lock: It is useful if you want to disable the

transmission function of the remote control temporarily to

prevent from any inadvertent pressing of buttons by others.

Press the button first, within 3 seconds press and hold

the ( ) button for 2 seconds to activate or cancel the

button lock function, the icon will displayed on the LCD

screen to show the LCD remote transmitter is on “Button

Lock”.

6. Vibration / Melody Mode:

It is useful when you are in a noisy place an

d difficult to hear

beep sound from the remote control. The remote control in

this mode will vibrate when your security system is

triggered.

Press the button first, within 3 seconds press and

hold the ( ) button for 2 seconds to select the mode

of vibration or melody, the icon will displayed

on the LCD screen to show the LCD remote transmitter is

on vibration mode.

7. Enable / Disable Bi Sound While Pressing Button:

It has a short “bi” sound while pressing the button of the LCD screen

transmitter

If you want mute the “bi” sound mute always while press button. Press the

button first, within 3 seconds press and hold the (Bi) button for 2

seconds to disable the “bi” sound.

8. Low Battery Indication:

When the power of the battery weakens, it has two short “bi” sound and flash

icon while pressing the button of the LCD screen transmitter.

9. Set Up Fixed Count Down Timer:

1. Press the button first, within 3 seconds press and hold the

( ) button for 2 seconds, the LCD screen will shows icon and timer (i.e.

0:10),